Storing the strongest
broadcast frequencies
BSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies under
0-9 (1
–
6)
on the remote
contorl and once stored there you can tune in
to those frequencies with the touch of a but-
ton.
1
Use MULTI-CONTROL to select BSM in
the function menu.
BSM
appears in the display.
2
Press MULTI-CONTROL to turn BSM on.
Searching
is displayed. While
Searching
is
displayed, the six strongest broadcast frequen-
cies will be stored under
0-9 (1-6)
on the re-
mote control in the order of their signal
strength. When finished, the preset channel
list appears.
#
To cancel the storage process, press
MULTI-CONTROL
.
3
Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station; press to select.
#
You can also change the station by pushing
MULTI-CONTROL
up or down.
Note
Storing broadcast frequencies with BSM may re-
place broadcast frequencies you have saved
using
0-9 (1
–
6)
on the remote control.
Selecting stations from the
preset channel list
The preset channel list lets you see the list of
preset stations and select one of them to re-
ceive.
1
Press LIST to switch to the preset chan-
nel list mode during the frequency display.
2
Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station; press to select.
#
You can also change the station by pushing
MULTI-CONTROL
up or down.
#
If you do not operate the list within about 30
seconds, the preset channel list mode is can-
celed automatically.
Notes
!
You can also recall radio station frequencies
assigned to preset tuning numbers by push-
ing
MULTI-CONTROL
up or down during the
frequency display.
!
You can also recall radio station frequencies
assigned to preset tuning numbers by press-
ing one of the preset tuning buttons
0-9 (1-6)
on the remote control.
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
1
Use MULTI-CONTROL to select Local in
the function menu.
Local
appears in the display.
2
Press MULTI-CONTROL to turn local
seek tuning on.
Local seek sensitivity (e.g.,
Level 2
) appears in
the display.
#
To turn local seek tuning off, press
MULTI-CONTROL
again.
3
Push MULTI-CONTROL left or right to
set the sensitivity.
There are four levels of sensitivity for FM and
two levels for MW/LW:
FM:
Level 1
—
Level 2
—
Level 3
—
Level 4
MW/LW:
Level 1
—
Level 2
The
Level 4
setting allows reception of only
the strongest stations, while lower settings let
you receive progressively weaker stations.
Tuner
En
20
Section
04
Summary of Contents for DEH-P75BT
Page 2: ...En 2 ...
