Listening to the radio
5
2
1
4
3
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on the next page.
Important
If you are using this unit in North, Central or
South America, reset the AM tuning step (see
Setting the AM tuning step
on page 40).
1
Stereo (ST) indicator
Shows that the frequency selected is being
broadcast in stereo.
2
LOC indicator
Shows when local seek tuning is on.
3
Preset number indicator
Shows which preset has been selected.
4
Band indicator
Shows which band the radio is tuned to, AM
or FM.
5
Frequency indicator
Shows to which frequency the tuner is
tuned.
1 Press SOURCE to select the tuner.
Press
SOURCE
until you see
Tuner
displayed.
2 Press BAND to select a band.
Press
BAND
until the desired band is dis-
played,
FM1
,
FM2
,
FM3
for FM or
AM
.
3 To performmanual tuning, briefly press
c
or
d
.
The frequencies move up or down step by
step.
4 To performseek tuning, press and hold
c
or
d
for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
#
You can cancel seek tuning by briefly pressing
either
c
or
d
.
#
If you press and hold
c
or
d
you can skip sta-
tions. Seek tuning starts as soon as you release
the button.
Tuner
En
13
English
Section
04
