Playing a CD
2
1
These are the basic steps necessary to play a
CD with your built-in CD player. More ad-
vanced CD operation is explained starting on
this page.
1
Track number indicator
Shows the track currently playing.
2
Play time indicator
Shows the elapsed playing time of the cur-
rent track.
1 Press SOURCE to select the built-in CD
player.
Press
SOURCE
until you see
Compact Disc
displayed.
#
If no disc is loaded in the unit, you cannot se-
lect
Compact Disc
(built-in CD player). Insert a
disc in the unit. (Refer to page 11.)
2 To performfast forward or reverse,
press and hold
c
or
d
.
#
If you select
ROUGH SEARCH
, pressing and
holding
c
or
d
enables you to search every 10
tracks in the current disc. (Refer to
Selecting the
search method
on page 18.)
3 To skip back or forward to another
track, press
c
or
d
.
Pressing
d
skips to the start of the next track.
Pressing
c
once skips to the start of the cur-
rent track. Pressing again will skip to the pre-
vious track.
Introduction of advanced
built-in CD player operation
1
1
Function display
Shows the function status.
%
Press FUNCTION to display the function
names.
Press
FUNCTION
repeatedly to switch be-
tween the following functions:
Repeat
(repeat play)
Random
(random play)
Scan
(scan play)
Pause
(pause)
Comp./BMX
(compression and BMX)
FF/REV
(search method)
#
To return to the playback display, press
BAND
.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the playback display.
Repeating play
Repeat play lets you hear the same track over
again.
1 Press FUNCTION to select Repeat.
Press
FUNCTION
until
Repeat
appears in the
display.
2 Press
c
or
d
to select the repeat range.
Press
c
or
d
until the desired repeat range ap-
pears in the display.
!
DISC
Repeat the current disc
Built-in CD Player
En
16
Section
05
