!
To return to the ordinary display, press
BAND/ESC
.
!
If you select another folder during repeat play,
the repeat play range changes to
ALL
.
!
If you perform track search or fast forward/re-
verse during
TRACK
, the repeat play range
changes to
FOLDER
.
!
When
FOLDER
is selected, it is not possible to
play back a subfolder of that folder.
!
After file or folder scanning is finished, nor-
mal playback of the files begins again.
Playing songs on iPod
For details about the supported iPod, refer to
iPod
®
compatibility on page 6.
Basic Operations
%
Fast forward or reverse
Push and hold
MULTI-CONTROL
left or right
for about one second and release.
%
Select a track (chapter)
Push
MULTI-CONTROL
left or right.
Notes
!
When using an iPod, iPod Dock Connector to
USB Cable is required.
!
Read the precautions for iPod on page 54.
!
While iPod is connected to this unit,
PIONEER
(or
(check mark)) is displayed on the iPod.
!
If an error message such as
ERROR-19
is dis-
played, refer to
Error messages
on page 50.
!
When the ignition switch is set to ACC or ON,
the iPod
’
s battery is charged while the iPod is
connected to this unit.
!
While the iPod is connected to this unit, the
iPod cannot be turned on or off.
!
Before connecting the dock connector of this
unit to the iPod, disconnect the headphones
from the iPod.
!
The iPod is turned off about two minutes after
the ignition switch is set to OFF.
Browsing for a song
Operations to control an iPod with this unit is
designed to be as close to the iPod as possible
to make operation and song search easy.
!
Depending on the number of files in the
iPod, there may be delay when displaying a
list.
!
If the characters recorded on the iPod are
not compatible with this unit, those charac-
ters are not displayed.
1
Press LIST to switch to the top menu of
the list search.
Operating this unit
En
22
Section
02
