#
You can also store the frequency in memory
by pushing and holding
MULTI-CONTROL
right.
3
Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station. Press to select.
#
You can also change the station by pushing
MULTI-CONTROL
up or down.
#
To return to the ordinary display, press
BAND/ESC
or
LIST
.
#
If you do not operate the list within about 30
seconds, the display automatically returns to the
ordinary display.
Receiving PTY alarm broadcasts
When the emergency PTY code broadcasts,
the unit receives it automatically (
ALARM
ap-
pears). When the broadcasting ends, the sys-
tem returns to the previous source.
!
An emergency announcement can be can-
celed by pressing
TA
.
Introduction of advanced
operations
1
Press MULTI-CONTROL to display the
main menu.
2
Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option. Press to se-
lect.
3
Turn MULTI-CONTROL to select the
function.
BSM
(best stations memory)
—
REGIONAL
(re-
gional)
—
LOCAL
(local seek tuning)
—
PTY SEARCH
(program type selection)
—
TRAFFIC
(traffic announcement standby)
—
AF
(alternative frequencies search)
—
NEWS
(news program interruption)
Notes
!
You can also select the function by pressing
FUNCTION
on the remote control.
!
To return to the previous display, press
BACK
.
!
To return to the main menu, press and hold
BACK
.
!
To return to the ordinary display, press
BAND/ESC
.
!
If MW/LW band is selected, you can only se-
lect
BSM
or
LOCAL
.
Storing the strongest broadcast
frequencies
BSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies.
1
Use MULTI-CONTROL to select BSM in
the function menu.
2
Press MULTI-CONTROL to turn BSM on.
The six strongest broadcast frequencies are
stored in the order of their signal strength.
#
To cancel, press
MULTI-CONTROL
again.
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
%
Press LOCAL repeatedly to select the
desired setting.
FM:
OFF
—
LEVEL 1
—
LEVEL 2
—
LEVEL 3
—
LEVEL 4
MW/LW:
OFF
—
LEVEL 1
—
LEVEL 2
The
LEVEL 4
setting allows reception of only
the strongest stations, while lower settings let
you receive progressively weaker stations.
Note
You can also perform this operation in the menu
that appears by using
MULTI-CONTROL
.
Selecting alternative frequencies
When the tuner cannot get a good reception,
the unit automatically searches for a different
station in the same network.
Operating this unit
En
13
English
Section
02
