Black plate (38,1)
<XRD7106-A/N>38
Note
If seek tuning is performed in 50 kHz steps, sta-
tions may be tuned in imprecisely. Tune in the sta-
tions with manual tuning or use seek tuning
again.
Setting the AM tuning step
The AM tuning step can be switched between
9 kHz, the preset step, and 10 kHz. When
using the tuner in North, Central or South
America, reset the tuning step from 9 kHz (531
1 602 kHz allowable) to 10 kHz (530
1 640
kHz allowable).
1 Press FUNCTION to select AM Step.
Press
FUNCTION
repeatedly until
AM Step
appears in the display.
2 Press
c
or
d
to select the AM tuning
step.
Pressing
c
or
d
will switch the AM tuning
step between 9 kHz and 10 kHz. The selected
AM tuning step will appear in the display.
Switching the warning tone
If the front panel is not detached from the
head unit within five seconds of turning off the
ignition, a warning tone will sound. You can
turn off the warning tone.
1 Press FUNCTION to select Warning.
Press
FUNCTION
repeatedly until
Warning
appears in the display.
2 Press
a
or
b
to turn Warning on or off.
Pressing
a
or
b
will turn
Warning
on or off
and that status will be displayed (e.g.,
Warning : ON
).
Switching the auxiliary setting
It is possible to use auxiliary equipment with
this unit. Activate the auxiliary setting when
using auxiliary equipment connected to this
unit.
1 Press FUNCTION to select AUX.
Press
FUNCTION
repeatedly until
AUX
ap-
pears in the display.
2 Press
a
or
b
to turn AUX on or off.
Pressing
a
or
b
will turn
AUX
on or off and
that status will be displayed (e.g.,
AUX : ON
).
Switching the dimmer setting
To prevent the display from being too bright at
night, the display is automatically dimmed
when the car
s headlights are turned on. You
can turn the dimmer on or off.
1 Press FUNCTION to select Dimmer.
Press
FUNCTION
repeatedly until
Dimmer
ap-
pears in the display.
2 Press
a
or
b
to turn Dimmer on or off.
Pressing
a
or
b
will turn
Dimmer
on or off
and that status will be displayed (e.g.,
Dimmer : ON
).
Adjusting the brightness
You can adjust the display brightness. Initially
this mode is set to 12.
1 Press FUNCTION to select Brightness.
Press
FUNCTION
repeatedly until
Brightness
appears in the display.
Initial Settings
En
38
Section
09
All manuals and user guides at all-guides.com