Black plate (35,1)
<XRD7106-A/N>35
Adjusting subwoofer settings
When the subwoofer output is on, you can ad-
just the cut-off frequency and the output level
of the subwoofer.
1 Press AUDIO to select Sub-W2.
Press
AUDIO
until
Sub-W2
appears in the dis-
play.
#
You can also select the subwoofer setting
menu by pressing
SW
on the unit.
#
When the subwoofer output is on, you can se-
lect
Sub-W2
.
2 Press
c
or
d
to select cut-off frequency.
Each press of
c
or
d
selects cut-off frequen-
cies in the following order:
50
80
125
(Hz)
Only frequencies lower than those in the se-
lected range are outputted from the subwoo-
fer.
3 Press
a
or
b
to adjust the output level
of the subwoofer.
Each press of
a
or
b
increases or decreases
the level of the subwoofer.
+6
6
is displayed
as the level is increased or decreased.
Using nonfading output
When the nonfading output setting is on, the
audio signal does not pass through this unit
s
low pass filter (for the subwoofer), but is out-
putted through the RCA output.
1 Press AUDIO to select nonfading output
on/off setting.
Press
AUDIO
until
NonFad ON
appears in the
display.
#
When the subwoofer controller setting is only
PREOUT:FULL
, you can switch to the nonfading
output on/off setting. (Refer to page 39.)
2 Press
a
to turn nonfading output on.
NonFad ON
appears in the display. Nonfading
output is now on.
#
To turn nonfading output off, press
b
.
Adjusting nonfading output level
When the nonfading output is on, you can ad-
just the level of nonfading output.
1 Press AUDIO to select nonfading output
setting.
Press
AUDIO
until
NonFad 0
appears in the
display.
2 Press
a
or
b
to adjust the nonfading
output level.
Each press of
a
or
b
increases or decreases
the level of the nonfading output.
+6
6
is
displayed as the level is increased or
decreased.
Using the high pass filter
When you do not want low sounds from the
subwoofer output frequency range to play
from the front or rear speakers, turn on the
HPF (high pass filter). Only frequencies higher
than those in the selected range are outputted
from the front or rear speakers.
1 Press AUDIO to select HPF.
Press
AUDIO
until
HPF
appears in the display.
2 Press
a
to turn high pass filter on.
HPF 80 Hz
appears in the display. High pass
filter is now on.
#
To turn high pass filter off, press
b
.
3 Press
c
or
d
to select cut-off frequency.
Each press of
c
or
d
selects cut-off frequen-
cies in the following order:
50
80
125
(Hz)
Audio Adjustments
En
35
English
Section
08
All manuals and user guides at all-guides.com
