Pioneer DEH-P55BT/XN/EW5, Service Manual

Page: 64 / 94

DEH-P55BT/XN/EW5
64
1 2 3 4
1 2 3 4
C
D
F
A
B
E
B T - T E S T
H T E T S E L
T R - 0 2
S H - P - -
Operation Method Screen
When +Battery and ACC are ON, push 4 and
6 buttons simultaneously, and then start the
BT Test Mode using the PHONE Key.
3 seconds after Test Mode Start-up: it goes to the
Test Mode Selection Screen
Display of HSP_Connect_TEST Mode with initial
values
Mode selection using the left/right keys: Select
“LOC NM” (no data modulation).
Upon decision with the “OFF HOOK” key, you go
to Frequency Selection. The initial value is
2402MHz.
Use the UP/DOWN keys to select the frequency.
The initial value is 2402MHz.
02: 2402 <--> 41:2441 <--> 80: 2480 <--> 95:2495
Decide with the “OFF HOOK” key.
LOC NM Setting Confirmation Screen: Setting of
the product is now completed.
Measure the output level of each frequency using
the spectrum analyzer with the above mentioned
connection.
Judgment criteria: the product is assumed OK, if
the output level V is within the following range:
“-6 dBm < V < 4 dBm”
Operation Specification
S P S
L L M E L S O C A N
T X F R E Q
0 2 2 4 0 2
-
PHONE
DISP
*1
*2
*3
[NOTES]
*1 : “PEE” Sound 1 comes out and display
of “BT-TEST” is shown for 3 seconds.
*2 : After display of “BT-TEST”, the screen
changes automatically.
HSP is abbreviation of HEAD_SET_
PROFILE.
*3 : In measurement, each of 02, 41, and 80
is measured.
Go back to SEL Screen using the BAND
key.
4. How to start-up the Test Mode