Pioneer DEH-P55BT/XN/EW5, Service Manual

Page: 61 / 94

DEH-P55BT/XN/EW5
61
5 6 7 8
5 6
7
8
C
D
F
A
B
E
DEH-P55BT
Bluetooth
Specification of a Mobile Phone with a built-in BT function
A mobile phone which supports Bluetooth Ver.1.2 and incorporates HFP and OPP is the minimum requirement.
Preferably, select a phone type for which connection has been satisfactory verified.
[6230(Nokia), SonyEricsson(Z600), etc.]
A type with connection waiting function is desirable.
1. Instructions
* The followings are practical instructions for connecting a mobile phone at a service site.
With the conventional specification, when an actual mobile phone is connected for operation check while maintenance
at a repair site, “BUP off” caused clear of the memory. But, with the specification of this time, “BUP off” does not clear
the memory, because the phone directory registered by the user is maintained.
If you connect an actual mobile phone for operation check or some other purpose at the service site and then return the
product to the user as it is, information of the telephone set registered at the service site will be left in the product.
Therefore, if you have connected an actual mobile phone for operation check, etc. at site, you have to clear only
information on the mobile phone used for the service from the FUNCTION Menu.
Please provide description on this matter in your operation manual.
[ Important ]
Note that, in accordance with the specification change in Memory Clear, registerable numbers 1 – 5 and “Guest”
register numbers that the user has already registered (or telephone number information registered by the user, if a
mobile phone is connected to “Guest”), are overwritten.
2. Overview of the Functions
You can use a BT-supporting mobile phone to check BT operation in a simple method.
The following three points shall be checked in the test mode:
• Bluetooth Connection (authentication connection and voice connection) Check
• BT Antenna Sensitivity (Connection) Check
• FLASH Memory Operation Check
3. Configuration Scheme
-
Specification of Service Test Mode Functions (for use with a BT-supporting mobile phone)