manualshive.com logo in svg

Pioneer DEH-P4950MP, Service Manual

The Pioneer DEH-P4950MP offers exceptional audio quality and convenience in a car stereo system. Ensure a seamless user experience with the provided Operation Manual, available for free download from manualshive.com. This comprehensive manual equips users with all the necessary instructions to maximize the potential of this impressive product.

Share
Download
background image

 

DEH-P4950MP/XU/CN5

3

5

6

7

8

5

6

7

8

C

D

F

A

B

E

[Important Check Points for Good Servicing]

In this manual, procedures that must be performed during repairs are marked with the below symbol.
Please be sure to confirm and follow these procedures.

1. Product safety

Please conform to product regulations (such as safety and radiation regulations), and maintain a safe servicing environment by 
following the safety instructions described in this manual.

1

  Use specified parts for repair.

Use genuine parts.  Be sure to use important parts for safety.

2

  Do not perform modifications without proper instructions.

Please follow the specified safety methods when modification(addition/change of parts)  is required due to interferences such as 
radio/TV interference and foreign noise.

3

  Make sure the soldering of repaired locations is properly performed.

When you solder while repairing, please be sure that there are no cold solder and other debris.
Soldering should be finished with the proper quantity. (Refer to the example)

4

  Make sure the screws are tightly fastened.

Please be sure that all screws are fastened, and that there are no loose screws.

5

  Make sure each connectors are correctly inserted.

Please be sure that all connectors are inserted, and that there are no imperfect insertion.

6

  Make sure the wiring cables are set to their original state.

Please replace the wiring and cables to the original state after repairs.
In addition, be sure that there are no pinched wires, etc.

7

  Make sure screws and soldering scraps do not remain inside the product.

Please check that neither solder debris nor screws remain inside the product.

8

  There should be no semi-broken wires, scratches, melting, etc. on the coating of the power cord.

Damaged power cords may lead to fire accidents, so please be sure that there are no damages.
If you find a damaged power cord, please exchange it with a suitable one.

9

  There should be no spark traces or similar marks on the power plug.

When spark traces or similar marks are found on the power supply plug, please check the connection and advise on secure 
connections and suitable usage.   Please exchange the power cord if necessary.

0

  Safe environment should be secured during servicing.

When you perform repairs, please pay attention to static electricity, furniture, household articles, etc. in order to prevent injuries.  
Please pay attention to your surroundings and repair safely. 

2. Adjustments

To keep the original performance of the products, optimum adjustments and confirmation of characteristics within specification.
Adjustments should be performed in accordance with the procedures/instructions described in this manual.

4. Cleaning

For parts that require cleaning, such as optical pickups, tape deck heads, lenses and mirrors used in projection monitors, proper 
cleaning should be performed to restore their performances.

3. Lubricants, Glues, and Replacement parts

Use grease and adhesives that are equal to the specified substance. 
Make sure the proper amount is applied.

5. Shipping mode and Shipping screws

To protect products from damages or failures during transit, the shipping mode should be set or the shipping screws should be 
installed before shipment.  Please be sure to follow this method especially if it is specified in this manual.

Summary of Contents for DEH-P4950MP





































































Reviews:

No comments

Related manuals for DEH-P4950MP

Jensen VM9214BT Installation Manual preview
VM9214BT
Brand: Jensen Pages: 12
Jensen VM9213 - Touch Screen MultiMedia Receiver Quick Reference Manual preview
VM9213 - Touch Screen MultiMedia Receiver
Brand: Jensen Pages: 62
Jensen MCD 5110 Operation preview
MCD 5110
Brand: Jensen Pages: 9
Jensen JHD3630BT Installation And Operation Manual preview
JHD3630BT
Brand: Jensen Pages: 22
Jensen JHD3510 - Heavy Duty CD Receiver Quick Reference Manual preview
JHD3510 - Heavy Duty CD Receiver
Brand: Jensen Pages: 2
Jensen VM8013HD - Screen MultiMedia Receiver Installation And Operation Manual preview
VM8013HD - Screen MultiMedia Receiver
Brand: Jensen Pages: 78
Jensen Phase Linear UV10 Instruction Manual preview
Phase Linear UV10
Brand: Jensen Pages: 90
MAC Audio edition BS30 Owner'S Manual preview
edition BS30
Brand: MAC Audio Pages: 12
Ramsey Electronics HR20 User Manual preview
HR20
Brand: Ramsey Electronics Pages: 28
Clarke-tech C-Tech HD 6600 SST Manual preview
C-Tech HD 6600 SST
Brand: Clarke-tech Pages: 32
TSL Smartcard 1060 User Manual preview
Smartcard 1060
Brand: TSL Pages: 22
tbs electronics TBS6908 User Manual preview
TBS6908
Brand: tbs electronics Pages: 20
Proteco RX 4331 12-24V Installation And Use Manual preview
RX 4331 12-24V
Brand: Proteco Pages: 9
Trantec S-D7802 Instruction Manual preview
S-D7802
Brand: Trantec Pages: 22
Boss Audio Systems BV8975B User Manual preview
BV8975B
Brand: Boss Audio Systems Pages: 22
Boss Audio Systems MGV520B User Manual preview
MGV520B
Brand: Boss Audio Systems Pages: 23
Aiwa XR-M70 Service Manual preview
XR-M70
Brand: Aiwa Pages: 14
BUXTON BAA 100 BLACK User Manual preview
BAA 100 BLACK
Brand: BUXTON Pages: 40

Brands by name

Popular brands

Load more brands