Fig. 12
Abb. 12
Afb. 12
1*
2*
4*
3*
5*
9.
3. Subwoofer output or
non fading output
33.
4. Antenna jack
1. This product
2. Front output
5. Fuse
6. IP-BUS input
(Blue)
7. IP-BUS cable
Note:
Depending on the kind of vehicle, the function
of 3* and 5* may be different. In this case, be
sure to connect 2* to 5* and 4* to 3*.
10. Connect leads of the same
color to each other.
11. Cap (1*)
When not using this terminal,
do not remove the cap.
12. Yellow (3*)
Back-up
(or accessory)
13. Yellow (2*)
To terminal always supplied
with power regardless of
ignition switch position.
14. Red (5*)
Accessory
(or back-up)
15. Red (4*)
To electric terminal controlled
by ignition switch (12 V DC)
ON/OFF.
16. Orange/white
To lighting switch terminal.
17. Black (ground)
To vehicle (metal) body.
18. ISO connector
Note:
In some vehicles, the ISO connector may be
divided into two. In this case, be sure to
connect to both connectors.
19. Yellow/black
If you use a cellular telephone, connect it via the
Audio Mute lead on the cellular telephone. If not,
keep the Audio Mute lead free of any connections.
20. Speaker leads
White
: Front left
+
White/black: Front left
≠
Gray
: Front right
+
Gray/black : Front right
≠
Green
: Rear left
+
or Subwoofer
+
Green/black: Rear left
≠
or Subwoofer
≠
Violet
: Rear right
+
or Subwoofer
+
Violet/black: Rear right
≠
or Subwoofer
≠
21. Connecting cords with RCA pin
plugs (sold separately)
8. Multi-CD player
(sold separately)
22. Power amp
(sold separately)
22. Power amp
(sold separately)
23. Blue/white
To system control terminal of
the power amp (max. 300 mA
12 V DC).
24. System remote control
25. Blue/white (7*)
To Auto-antenna relay control terminal
(max. 300 mA 12 V DC).
26. Blue/white (6*)
27. The pin position of the ISO connector will differ
depends on the type of vehicle. Connect 6* and 7*
when Pin 5 is an antenna control type. In another
type of vehicle, never connect 6* and 7*.
28. Front speaker
28. Front speaker
29.
Left
30.
Right
31. Subwoofer
31. Subwoofer
32. Perform these connections when using
the optional amplifier.
Note:
Change the initial setting of this unit (refer
to the Operation Manual). The subwoofer
output of this unit is monaural.
CRD3696A_JS 7/31/02 17:01 Page 17
