Playing a CD
2
1
These are the basic steps necessary to play a
CD with your built-in CD player. More ad-
vanced CD operation is explained starting on
the next page.
1
Play time indicator
Shows the elapsed playing time of the cur-
rent track.
2
Track number indicator
Shows the track currently playing.
1 Insert a CD into the CD loading slot.
Playback will automatically start.
#
Be sure to turn up the label side of a disc.
#
After a CD has been inserted, press
SOURCE
to select the built-in CD player.
#
You can eject a CD by pressing
EJECT
.
2 Use VOLUME to adjust the sound level.
Rotate it to increase or decrease the volume.
3 To perform fast forward or reverse,
press and hold
c
or
d
.
#
If you select
ROUGH
, pressing and holding
c
or
d
enables you to search every 10 tracks in the
current disc. (Refer to
Selecting the search meth-
od
on page 16.)
4 To skip back or forward to another
track, press
c
or
d
.
Pressing
d
skips to the start of the next track.
Pressing
c
once skips to the start of the cur-
rent track. Pressing again will skip to the pre-
vious track.
Notes
!
The built-in CD player plays one, standard, 12-
cm or 8-cm (single) CD at a time. Do not use
an adapter when playing 8-cm CDs.
!
Do not insert anything other than a CD into
the CD loading slot.
!
If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press
EJECT
to eject the disc, and check the
disc for damage before inserting it again.
!
If an error message such as
ERROR-11
is dis-
played, refer to
Understanding built-in CD
player error messages
on page 37.
!
When a CD TEXT disc is inserted, the disc and
track titles begin to scroll to the left auto-
matically.
Built-in CD Player
En
14
Section
05
