Black plate (6,1)
<CRD4029-A/N>6
Basic Operations
Turning the unit on and
selecting a source
You can select a source you want to listen to.
To switch to the built-in CD player, load a disc
in the unit (refer to page 8).
%
Press SOURCE to select a source.
Press
SOURCE
repeatedly to switch between
the following sources:
Built-in CD player
Tuner
When you select a source, the unit is turned
on.
Notes
!
When no disc has been set in the unit, the
source will not switch to the built-in CD player.
!
When this unit
s blue/white lead is connected
to the vehicle
s auto-antenna relay control
terminal, the vehicle
s antenna extends when
this unit
s source is turned on. To retract the
antenna, turn the source off.
Adjusting the volume
%
Use VOLUME to adjust the sound level.
Turning the unit off
%
Press SOURCE and hold until the unit
turns off.
Tuner
Listening to the radio
1
2
4
5
3
Important
If you are using this unit in North, Central or
South America, reset the AM tuning step (see
Setting the AM tuning step
on page 13).
1
Band indicator
Shows which band the radio is tuned to, AM
or FM.
2
LOC indicator
Shows when local seek tuning is on.
3
Stereo (
5
) indicator
Shows when the selected frequency is
being broadcast in stereo.
4
Frequency indicator
Shows the frequency to which the tuner is
tuned.
5
Preset number indicator
Shows which preset has been selected.
1 Press SOURCE to select the tuner.
2 Press BAND to select a band.
Press
BAND
until the desired band (
F1
,
F2
,
F3
for FM or
AM
) is displayed.
3 To perform manual tuning, briefly press
c
or
d
.
4 To perform seektuning, press and hold
c
or
d
for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
Operating this unit
En
6
Section
03
