Black plate (12,1)
<CRD4029-A/N>12
2 Press
a
to turn loudness on.
LOUD
indicator is displayed.
#
To turn loudness off, press
b
.
#
You can also turn loudness on or off by press-
ing and holding
EQ
.
3 Press
c
or
d
to select a desired level.
LOW
(low)
HI
(high)
Adjusting source levels
SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
!
Settings are based on the FM tuner volume
level, which remains unchanged.
!
The AM tuner volume level can also be ad-
justed with source level adjustments.
1 Compare the FM tuner volume level
with the level of the source you wish to ad-
just.
2 Press AUDIO to select SLA.
3 Press
a
or
b
to adjust the source vo-
lume.
SLA +4
SLA
4
is displayed as the source vo-
lume is increased or decreased.
Initial Settings
Adjusting initial settings
1
Using the initial settings, you can customize
various system settings to achieve optimal per-
formance from this unit.
1
Function display
Shows the function status.
1 Press SOURCE and hold until the unit
turns off.
2 Press AUDIO and hold until clockap-
pears in the display.
3 Press AUDIO to display the function
names.
Press
AUDIO
repeatedly to switch between
the following settings:
Clock
FM
(FM tuning step)
AM
(AM tuning
step)
Use the following instructions to operate each
particular setting.
#
To cancel initial settings, press
BAND
.
#
You can also cancel initial settings by holding
down
SOURCE
until the unit turns off.
Setting the clock
Use these instructions to set the clock.
1 Press AUDIO to select clock.
2 Press
c
or
d
to select the segment of
the clockdisplay you wish to set.
Pressing
c
or
d
will select one segment of the
clock display:
Hour
Minute
As you select segments of the clock display
the segment selected will blink.
Operating this unit
En
12
Section
03
