!
The tuning step remains at 50 kHz during
manual tuning.
1
Use MULTI-CONTROL to select FM STEP
in the initial setting menu.
Refer to
Adjusting initial settings
on the pre-
vious page.
2
Press MULTI-CONTROL to display the
setting mode.
3
Turn MULTI-CONTROL to select the FM
tuning step.
50 KHZ
(50 kHz)
—
100 KHZ
(100 kHz)
4
Press MULTI-CONTROL to determine
the selection.
#
Even if the menu has been cancelled before
determination, operation is settled.
Switching Auto PI Seek
The unit can automatically search for a differ-
ent station with the same programming, even
during preset recall.
1
Use MULTI-CONTROL to select AUTO-PI
in the initial setting menu.
Refer to
Adjusting initial settings
on the pre-
vious page.
2
Press MULTI-CONTROL to turn Auto PI
seek on.
#
To turn Auto PI seek off, press
MULTI-CONTROL
again.
Switching the auxiliary setting
It is possible to use auxiliary device with this
unit. Activate the auxiliary setting when using
auxiliary device connected to this unit.
1
Use MULTI-CONTROL to select AUX in
the initial setting menu.
Refer to
Adjusting initial settings
on the pre-
vious page.
2
Press MULTI-CONTROL to turn AUX on.
#
To turn AUX off, press
MULTI-CONTROL
again.
Multi language display setting
Text information such as title name, artist
name or comment can be recorded on a com-
pressed audio disc.
This unit can display them even if they are em-
bedded in a European language or Russian.
!
If the embedded language and the selected
language setting are not the same, text in-
formation may not be displayed properly.
!
Some characters may not be displayed
properly.
1
Use MULTI-CONTROL to select
TITLE SETTING in the initial setting menu.
Refer to
Adjusting initial settings
on the pre-
vious page.
2
Press MULTI-CONTROL to display the
setting mode.
3
Turn MULTI-CONTROL to select the de-
sired setting.
EUROPEAN
(European language)
—
RUSSIAN
(Russian language)
4
Press MULTI-CONTROL to determine
the selection.
#
Even if the menu has been cancelled before
determination, operation is settled.
Saving the battery consumption
Switching this function on enables you to save
the consumption of battery power.
!
Operations other than turning on the
source are not allowed when this function
is on.
Operating this unit
En
18
Section
02
