Pioneer DDJ-SX, Operating Instructions Manual

Page: 28 / 33

28
En
Mixer section
a
b
2 2
c
e
d
9
3
1
7
2
4
8
3 3
3
1
6
4
4
7
7
8 5
6
1 TRIM control
2
EQ ( HI , MID , LOW ) controls
3
Channel Level Indicator
4
FILTER control
5
Headphones
CUE
/
MIC TALK OVER
button
6
Headphones CUE button
7
Channel fader
8
Crossfader Assign Switch
9
Crossfader
a
MASTER LEVEL control
b
Master level indicator
c
Booth monitor level control
d HEADPHONES MIXING
control
e
MASTER CUE button
Front panel
1 4 2 3 2 3
1
HEADPHONES LEVEL control
2 INPUT SELECT
switch
3
INPUT SELECT switch
4
Crossfader curve selector control
Mixing the sound of the microphone
1 Connect a microphone to the [MIC1] or [MIC2]
terminal.
2 Start up the system.
=
Starting the system (p.18)
3 Set the [INPUT SELECT] switch to [MIC1] or [MIC2].
4 Operate the [TRIM] control and the channel faders to
adjust the audio level output from the respective decks.
! The sound can be adjusted with the [
EQ
(
HI
,
MID
,
LOW
)] con-
trols, and filter effects can be applied to the respective channels
with the [
FILTER
] control.
Mixing the sound of a DJ player, etc.
1 Connect the DJ player or other line level output
device to the [CD] or [PHONO/LINE] terminals.
2 Start up the system.
=
Starting the system (p.18)
3 Set the [INPUT SELECT] switch to [CD] or [LINE].
4 Operate the [TRIM] control and the channel faders to
adjust the audio level output from the respective decks.
! The sound can be adjusted with the [
EQ
(
HI
,
MID
,
LOW
)] con-
trols, and filter effects can be applied to the respective channels
with the [
FILTER
] control.
Mixing the sound of an analog turntable,
etc.
1 Connect the analog player or other phono level (for
MM cartridges) output device to the [PHONO/LINE]
terminals.
2 Start up the system.
= Starting the system (p.18)
3 Set the [INPUT SELECT] switch to [PHONO].
4 Operate the [TRIM] control and the channel faders to
adjust the audio level output from the respective decks.
! The sound can be adjusted with the [ EQ ( HI , MID , LOW )] con-
trols, and filter effects can be applied to the respective channels
with the [
FILTER ] control.