1
Park your vehicle in a safe place.
Leave the ignition in the “ACC” position and
make sure that the handbrake is applied.
2
Press the MAP button to display the cur-
rent location.
Be sure to display the map of current position.
The updating cannot start at the other
screens, such as the scroll mode, the naviga-
tion menu and AV screen.
3
Press OPEN CLOSE button and insert the
upgrade disc into the disc loading slot.
The message confirming whether or not to
start the update will appear.
❒
If the message doesn’t appear, eject the
disc and display the map of current posi-
tion and then reinsert the disc.
4
Touch [Yes].
❒
To cancel the update, touch [
No
].
5
Touch [Yes].
The message “
Password obtained from
Pioneer should be entered to update.
Have you obtained the password? Please
press “Cancel” to stop update.
” appears.
To start the updating, touch [
Yes
].
Alternative options:
[No]
Shows “Device Number” (“Device#”) of your
navigation system.
[Cancel]
Cancel the update.
6
Enter the password for authentication that
you obtained in the “STEP 1” section,
then touch [OK].
After touching [
OK
], the system starts the
authentication. When the authentication is
finished properly, the message for confirma-
tion will appear.
After you touch [
Yes
] in this screen, you can-
not abort the updating until the installation of
the system programme finishes. The update
takes approximately 3 hours in total.
