Pioneer CMX-3000, Service Manual

Page: 83 / 85

83
CMX-3000, CU-V163
1
EJECT button (
0
)
2
CD TEXT/WAVE button
Each time the button is pressed the function changes
alternately as follows:
During digital mode, switches between
CD TEXT
2 3
CD TEXT
disc title display track title display
3
LOOP control buttons (*)
4
EMERGENCY LOOP button (*)
When this button is pressed, the current point is set as
the loop in-point, and loop play begins with an
automatically set out-point.
5
TEMPO controls (*)
Tempo control range button (TEMPO RANGE):
Pressing this button causes the variable range of the
tempo control slide to change each time the button is
pressed.
MASTER TEMPO button and indicator:
Pressing this button causes the master tempo feature to
be powered on or off each time it is pressed.
Tempo control slide:
Moving this slider in the positive (+) direction away from
the center position (normal playback tempo) causes the
tempo to become faster, and moving it in the negative
(–) direction causes the tempo to become slower.
PITCH BEND buttons (+, –):
When pressed during playback, causes pitch bend.
Pressing the “+” button causes pitch to accelerate, while
pressing the “–” button causes pitch to decelerate.
6
Time mode/Auto cueing button (*)
(TIME MODE/AUTO CUE)
TIME MODE:
Pressing this button causes the elapsed time and
remaining time (REMAIN) of the current track to be
displayed in succession on the time display of the display
unit.
AUTO CUE:
7
TRACK SEARCH button (
4
,
¢
)
8
SEARCH button (
1
,
¡
)
9
CUE button and indicator (*)
Cueing point settings
Cueing point sampler
Back cueing
Cueing point adjust
0
PLAY/PAUSE button (
3 8
) and indicator
-
JOG MODE button (*)
Each time this button is pressed, the jog mode switches
alternately between CDJ jog mode and SCRATCH jog
mode.
=
Display
~
Jog dial (+ FWD/– REV) (*)
!
TAP button (*)
When pressed during playback, the BPM counter
switches to manual mode, and the BPM value is
calculated from the interval at which the TAP button is
pressed. A BPM value in the range 40 to 199 BPM (varies
with the tempo change rate) can be entered when the
tempo change rate is 0%.
@
AUTO button (*)
Press for automatic BPM count
#
BPM synchro button (BPM SYNC) and indicator
(*)
Each time the button is pressed, switches BPM synchro
function ON/OFF. BMP SYNC indicator flashes during
ON, and lights steadily when OFF.
$
RELAY PLAY button and indicator (*)
%
HOT CUE recording mode button (REC) and indi-
cator (*)
Press to switch the HOT CUE button’s function (record/
access). In the record mode, the indicator lights.
^
HOT CUE buttons (1, 2, 3) and indicator (*)
Use to select the memory (1, 2, 3) into which you wish to
program hot cue point information, loop information, and
scratch mode information.
3
WAVE display
3
CD TEXT
3
CD TEXT
disc title display track title display
Operation buttons indicated by an asterisk (*) are not supported in digital mode.