Pioneer CMX-3000, Service Manual

Page: 84 / 85

84
CMX-3000, CU-V163
Display
1
TRACK number display
Displays the track number of the track currently being
played.
2
Playback speed display
Tempo control range display (±6, ±10, ±16, WIDE)
Displays the variable range mode of the tempo control
slide.
MASTER indicator
MASTER indicator on the master player lights during
BPM synchro play.
Tempo change rate display
Displays the rate of change of the tempo as specified
using the tempo control slide.
3
Ring display
During relay play, displays disc rotation status. During
BPM synchro mode, the display occurs in rhythm with the
beat.
4
Auto cueing indicator (A. CUE)
Lights up when auto cueing is turned on.
5
SCRATCH indictor
When jog mode is set to “SCRATCH,” flashes during
write to the scratch memory, and lights steadily when
data is fully written to the memory.
6
EMERGENCY LOOP indicator
Flashes during loop play in the Emergency Loop mode.
7
RELOOP indicator
Lights to indicate loop play is possible, and during loop
play.
8
LOOP indicator
Lights during loop play.
9
Automatic BPM Count indicator (AUTO)
Lights during automatic BPM count mode.
0
TAP mode indicator
Lights during TAP BPM count mode. Indicator goes out
for approximately 0.2 second the instant TAP button is
pressed.
-
Time display
Used to display the elapsed playback time (when the
REMAIN indicator is unlit) or the remaining playback time
(when the REMAIN indicator is lit) of the current track in
minutes (M), seconds (S), and frames (F).
=
WAVE Display / Character Display
During WAVE display, indicates the volume level of the
currently playing track. During character display, displays
CD TEXT. Characters displayable are limited to
alphabet, numerals, and certain symbols. The array
displays either the disc title or the track title. When disc
title is displayed, the
mark lights.
~
Playback position display
Used to display a full-scale bar graph for the track being
played to make it possible to get an intuitive feel of the
elapsed and remaining play time.
÷
Display as it appears when displaying elapsed time:
All indicators unlit and then indicators light up in
sequence from left
÷
Display as it appears when displaying remaining time:
All indicators lit and then indicators are turned off in
sequence from left
÷
Display as it appears when there are less than 30
seconds remaining in a track:
Slow flashing
÷
Display as it appears when there are less than 15
seconds remaining in a track:
Rapid flashing
!
BPM display
Used to display the number of BPM for the current track.
Note that it may not be possible to count BPM in the
automatic BPM count mode for some tracks. Then use
the TAP BPM count mode to do this.