Pioneer CDX-MG6047ZH, Service Manual

Page: 58 / 70

CDX-MG6047ZH/UC
58
1 2 3 4
1 2 3 4
C
D
F
A
B
E
7. GENERAL INFORMATION
7.1 DIAGNOSIS
7.1.1 DISASSEMBLY
-
Removing the Extension Unit (Fig. 1)
1. Remove the three screws B, then remove the side
frame and holder.
2. Remove screw C, screw D and PCB from the con-
nector.
3. Straighten the three currently bent claws, then
remove the extension unit.
-
Removing the CD Mechanism Module (Fig. 2)
1. Remove the three screws A, then remove the front
frame.
2. Remove the three screws B and two screws C, then
remove the damper and holder.
3. Remove the two spring
A
s, spring
B
and spring
C
from the hook, then remove the CD mechanism
module.
-
Removing the Keyboard PCB (Fig. 3)
1. Remove screws A and B, then remove the switch
PCB.
2. Remove the four screws C, then remove the guide.
3. Remove the four screws B and screw A, then remove
the keyboard PCB.
– Precautions on Assembly –
Apply spring
C
(black) to the front
side hook.
Remaining springs
A
and
B
are to be
hung on the center hook.
Fig. 1
Fig. 2
Fig. 3
-
Removing the Grille Assy (Fig. 1)
1. Remove the two screws A and the connector, then
remove the grille assy.
-
Removing the upper case (not shown)
1. Remove the five screws, then remove the upper
case.