3
REV 2/08
STEP 5.
Adjustable Spray Box
Parts required:
a. Snap ring
b. Adjustable spray box
Step 1: Slide adjustable spray box bar on the front axle
Step 2: Attach carriage bolt, washer, lock washer and wingnut
Step 3: Attach snap ring on end of axle to prevent spray box bar
from sliding off
Step 4: Attach free end of paint line hose to shut-off valve and
Tighten with 5/8” wrench
(DO NOT OVER TIGHTEN). MAKE SURE NOZZLE TIP IS ALIGNED
HORIZONTALLY WITH GROUND.
Use supplied Allen Wrenches to adjust side plates for proper width.
Adjust bar height by loosening wing nut and setting desired height,
retighten wing nut. Side plates may need to be adjusted up or down
depending on height of Spray Box Bar. Use supplied Allen Wrenches.
Do not over tighten side plates.
SIDE PLATES SHOULD BE ABLE TO MOVE
UP AND DOWN BY HAND.
