1
REV 2/08
If you have any questions concerning the assembly
or operation, please call our CUSTOMER SERVICE
DEPARTMENT at 800.877.1500.
TOOLS NEEDED FOR ASSEMBLY
1 - 5/8" Open End Wrench
1 - 7/16" Socket
1 - 7/16" Open End Wrench
1 - Crescent Wrench (Vise Grips may be substituted)
Allen Wrenches (supplied in hardware kit)
ASSEMBLY INSTRUCTIONS
FOR BRITE STRIPER
®
MODEL #2000
After Removing Box from Shipping Carton:
STEP 1.
Remove Brite Striper 2000 – two people necessary to lift
STEP 2.
Remove handle bar.
Remove box conaining:
12 Ft. Hand Hose Assembly
Hand Hose Wand
Drain Line
Shut-Off Valve Assembly
STEP 3.
Handle Assembly
Parts required:
a. Handle
b. Handle adjustment bolts
Step 1: Slide handle into frame
Step 2: Insert handle adjustment bolts
Step 3: Attach paint control lever to handle
NOTE: TEST CONTROL TRIGGER TO MAKE SURE CABLE IS ADJUSTED PROPERLY.
CABLE SHOULD HAVE SMALL AMOUNT OF SLACK.
