Turning on the TV, cable settop
(digital terminal), and VCR
To turn on the TV
•
Press the TV button. The TV turns on.
To turn on cable settop (digital terminal)
•
Press the CBL button. The cable settop
(digital terminal) turns on.
To turn on the VCR
•
Press the VCR button. The VCR turns on.
To turn on the Stereo
•
Press the AUD button. The stereo turns on.
Changing channels
To change channels
•
If you know the channel number, enter the
number using the number buttons. Press the
SELECT button for immediate tuning.
•
To go one channel up from the current
channel, press ‘+’ on the CH button.
•
To go one channel down from the current
channel, press ‘-’ on the CH button.
•
To see previously tuned channel (tuned to
with the numbered buttons), press the
LAST button.
•
To see the next channel that you specified
as a favorite channel, press the FAV button.
Note: Refer to “Choosing Quick Settings” on
page 12 and the “Favorite Channels” option in
the General Settings menu on page 11.
Adjusting the volume level
To adjust the volume level
•
To increase the volume, press ‘+’ on
the VOL button.
•
To decrease the volume, press ‘-’ on
the VOL button.
•
To turn the volume off completely, press
the MUTE button.
•
To “unmute” the volume and continue
listening to the program, press the MUTE
button again.
Displaying the channel banner
TV Navigator includes the channel banner to
provide quick access to program information about
the program title and the program’s start and end
time. The figure below shows the channel banner.
Getting Started
–
Turning on the TV, cable settop (digital terminal), and VCR
4
Summary of Contents for BR-360
Page 1: ...T V N A V I G A T O R Getting Started rev 03 03 ...
Page 2: ......