Pioneer BONUS VIEW BDP-51FD, Service Manual

Page: 45 / 110

45
BDP-51FD
5 6 7 8
5 6 7 8
A
B
C
D
E
F
6
After reading of the ID data is completed, writing of the
data on the flash ROM will start. (" W RITE ID DATA" is
displayed on the FL display.)
7
Upon completion of writing on the flash ROM, "Rom
W rite OK!" will be displayed. ("ID DATA OK" will be
displayed on the FL display.)
The background color of the screen will change to blue
when writing of various key data is successfully
completed. If writing fails, the background color will
change to red.
8
Upon completion of writing, press the CLEAR key to exit
Input mode.
5
During data reading, the indications below will be
displayed. ("LOAD ID DATA" is displayed on the FL
display.)
5
6
7
8
W hen writing is successfully completed
W hen writing fails
[2] CPRM ID Re g istration Mode 2
• How to clear the ID No.
1
W ith the ID N o. set, press the ESC then STEREO keys.
2
Input the same number as the set ID N o.
3
Press the STOP key after the 9-digit number is input.
Only when the input number and the set number
coincide, the set ID N o. will be erased, and the unit will
exit this mode.
If the numbers do not coincide, the screen will return to
that in Step
2
.
(The STOP key is not accepted after input of a 9-digit
number is finished.)
• Example of the FL display durin g numeric input for
the ID No.
W hen the numerics 0, 1, and 2 are input, in that order:
[ 012]
* If an ID N o. is already registered, the registered ID N o. is
displayed before you enter any numeric. (The registered
ID
N o. also remains displayed when a wrong ID N o. is
input [ N G].)
Before any numeric is input (registered ID: 01234567 8 )
[01234567 8 ]
W hen the first digit (0) is input
[ 0]
2
3