Pioneer BONUS VIEW BDP-51FD, Service Manual

Page: 44 / 110

44
BDP-51FD
1 2 3 4
A
B
C
D
E
F
1 2 3 4
8.3 CPRM ID NUMBER AND DATA SETTING
•
An individual ID number and ID data (AACS, CPRM, BD+, W indows Media DRM, and MAC address)
must be input at the same time. All data are determined according to the data on the ID data disc. If the
number and data are not set correctly with the following procedure, the unit does not work properly.
You will find the ID number to be labeled on the rear panel.
This settin g is Necessary When:
•
W hen the DRI V E Assy or MAI N Assy is replaced.
Important: If no ID label is found on the rear panel, write down the specified ID number by checking it
on the version check screen ([ESC] + [DISP]).
•
Input the ID number while the unit is in Stop mode.
•
After the data are read from the ID data disc, the disc will automatically be unloaded.
•
Each time a key input succeeds, the screen background becomes blue. If a key input fails, the screen
background becomes red.
[Purposes]
[Tools to be used]
[Notes]
Remote control unit for servicing
(GGF1067)
ID Disc for Blu-ray Player Type 2 V ol 1.0
(GG V 1324)
[1] CPRM ID Re g istration Mode
2
3
4
• Conditions for enterin g CPRM ID Re g istration mode
During Playback Stop mode, press the ESC then STEREO
keys.
The above key inputs are accepted only during
N ormal
Playback Stop mode.
• Conditions for exitin g CPRM ID Re g istration mode
Press the CLEAR key to return to N ormal mode.
• How to input the ID No. and ID data
1
To enter Input mode, press the ESC then STEREO keys.
2
After entering Input mode, input a 9-digit ID N o.
(The number is displayed on the FL display.)
The ID N o. is described on the ID label located on the
rear panel of the product.
3
After the 9-digit ID N o. is input, the SEARCH key will be
accepted. If it is pressed, the ID N o. will be displayed.
4
After the ID N o. is set, the unit awaits ID data input.
("I N SERT ID DATA" is displayed on the FL display.)
Load the ID data disc in the disc tray. As soon as the tray
is closed, reading of the data will start.