07
38
En
Chapter 7
Setting the Audio/Video options
Changing the Audio options
There are a number of additional sound settings you can
make using the Audio Parameter menu.
Operating the Audio
Parameter screen
1
Press AUDIO P. to display the Audio Parameter
screen.
2
Use
/
to select the setting you want to adjust,
then press ENTER.
3
Use
/
to set as necessary, then press ENTER.
Closing the Audio Parameter screen
Press
AUDIO P.
or
RETURN
.
Note
• It is not possible to open the Audio Parameter screen when any of the
Home Menu
(
Source
,
Web Contents
,
Initial Setup
), Video Parameter, Function Menu, Disc Menu, YouTube or Picasa is being displayed.
• It is not possible to open the Audio Parameter screen while 3D contents are being played back.
• When DIRECT function is On, the Audio Parameter setting will not work.
• In Options, the factory default settings are indicated in bold.
TOP MENU
POPUP MENU
HOME MENU
RETURN
TOP
AUDIO P.
VIDEO P.
CONTINUED
POP
UP
SOURCE
ENTER
YouTube
Setting
Options
Explanation
Audio Scaler
1
(BDP-LX88 only)
Manual
The
Hi-bit32
,
Up Sampling
and
Digital Filter
can be configured to the desired
settings.
Auto
When
Auto
is selected,
Hi-bit32
,
Up Sampling
and
Digital Filter
are
automatically set to the optimum settings according to the 2-channel audio
source’s sampling frequency and bit rate to achieve high quality playback
sound.
Hi-bit32
1, 2
(BDP-LX88 only)
On
Creates a wider dynamic range with digital sources like CDs, DVDs or BDs. 16-
, 20- and 24-bit PCM as well as compressed audio is requantized to 32 bits, and
the high frequency component is interpolated upon data processing to enable
smoother, more subtle musical expression.
Off
Up Sampling
1, 2, 3
(BDP-LX88 only)
x1 (Off)
The 2-channel audio source’s sampling frequency is increased to the set
multiple to achieve high quality playback sound.
x2
x4
Digital Filter
1, 2
(BDP-LX88 only)
Slow
Switches the AUDIO DAC (Digital Audio Converter) digital filter type. One of two
settings can be selected:
Slow
(soft and warm),
Sharp
(solid and tight).
Sharp
Auto Sound Retriever
(BDP-LX88 only)
Off
With the Auto Sound Retriever function, DSP processing is used to compensate
for the loss of audio data upon compression, improving the sound’s sense of
density and modulation.
1
Also, when a player supporting the Sound Retriever
Link function is connected to the receiver by HDMI, by setting this to
On
, the
bitrate information of the compressed audio file being played on the player is
acquired using the
Control
with HDMI function, and the sound is optimized
based on this information (Sound Retriever Link).
On
Audio Sync
4
Auto
The player automatically adjusts the timing of the video and audio when
connected to a device equipped with the HDMI Audio Sync Correction feature
using an HDMI cable.
Manual
Adjust manually.
Audio Delay
5
0
to 200 (ms)
Some monitors have a slight delay when showing video, so the soundtrack will
be slightly out of sync with the picture. By adding a bit of delay, you can adjust
the sound to match the presentation of the video.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 38 ページ ２０１４年９月９日 火曜日 午前１０時１４分
