25
En
03
Switching the output
video resolution
Use the procedure below to switch the output video
resolution from the various video output terminals.
Press RESOLUTION
/
.
• The current output video resolution setting is
displayed on the player’s front panel display.
To switch the output video resolution, press
RESOLUTION
/
again.
• The output video resolution setting can also be
switched by selecting
Resolution
from the
Initial
Setup
menu (page 41).
If high definition videos of 4K etc.
are not visible
Change the settings by the following procedure.
1
Press the HDMI button on the remote control for
5 seconds or more.
2
If “4K 4:4:4” is displayed on the product screen,
use
/
button to change it to “4K 4:2:0”.
If the video improves after changing the setting, continue
using this setting.
To revert the setting to the original value, do the operation
described above again and change the setting to “4K
4:4:4”.
Caution
• On some devices (TV, AV receiver or amplifier, etc.),
the video or audio may not be output properly when
the resolution is switched. If this happens, use
RESOLUTION
to set a resolution at which the video
and audio are properly output.
• When video signals are being output with a resolution
of 4K/24p, 4K, 1080/50i, 1080/50p, 720/50p, 1080/24p,
1080/60i, 1080/60p or 720/60p from the
HDMI OUT
terminals, the picture may be output with an aspect
ratio of 16:9, even if the
TV Aspect Ratio
is set to
4:3
(Standard)
.
• The picture may not be displayed for a while when the
resolution is switched.
• When the connected device supports 3D and if a 3D
Disc is played back, the 3D output is prioritized for
output, regardless of the resolution settings. Also,
switching of resolution may not be possible while the
3D contents are playing.
• When
Auto
is selected, the picture is output at 60
frames/second if your TV is not compatible with 1080/
24p signals.
• When
4K
,
4K/24p
,
1080/24p
or
Source Direct
is
selected, the signals are output as such, even if your
TV is not compatible with 4K, 4K/24p or 1080/24p
signals. If the picture is not displayed properly, use
RESOLUTION
/
to set an output video resolution
at which the video and audio signals are properly
output.
• When the
Resolution
is set to
Auto
and if the
television set in use supports 4K or 4K/24p output,
then the output is made in 4K or 4K/24p. If the
connected television set does not support 4K or 4K/
24p, then the output is made with a recommended
resolution other than 4K.
• The pictures are output with the preferred output
resolution of the device (TV, AV receiver or amplifier,
etc.) connected to the selected video output terminal.
However, if devices are connected to both
HDMI
MAIN
and
HDMI SUB
, the pictures are output with a
resolution which both devices support. If the
resolution supported by the devices connected to the
HDMI MAIN
and
HDMI SUB
terminals vary, then
either turn off the power of the device that is not in
use, or connect the device that will be used to the
HDMI MAIN
terminal and set the
HDMI Mode
setting to
Single
in order to deliver output on the
device used for viewing video with optimum
resolution.
• When the
HDMI Mode
is set to
Dual
and if only one
of the devices that is connected to the
HDMI MAIN
and the
HDMI SUB
supports 3D, then a 3D disc may
not be played back. In such cases, either only connect
the device that supports 3D or connect the device that
supports 3D to the
HDMI MAIN
terminal and set the
HDMI Mode
to
Single
to play back the disc.
• When the
Resolution
is set to
Auto
, 1080p, 4K or 4K/
24p and if the resolution of output from the HDMI is
1080p, 4K or 4K/24p, then output may not occur
depending on the HDMI cable in use.
• There are resolutions that cannot be output
depending on the television set in use.
• When the
HDMI Mode
is set to
Pure Audio
, the
1080p60, 4K/60p or 4K/24p, output will not occur even
if the resolution is set to
Auto
or
1080p
,
4K
or
4K/
24p
. The output will be delivered with a resolution of
1080/60i, 1080/24p or the like, depending on the
resolution of the source and the connected television
set.
DIRECT
PROGRAM
R
G
Y
B
BOOKMARK ZOOM
INDEX
TV CONTROL
VOL
LIGHT
HDMI
CD/SACD
DIMMER
RESOLUTION
INPUT
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 25 ページ ２０１４年９月９日 火曜日 午前１０時１４分
