02
22
En
Connecting to the
network through LAN
interface
By connecting this player to the network via the LAN
terminal, you can play image, audio and video files stored
on the components on the network, including your
computer, using
Source
inputs.
Turn on the DHCP server function of your router. In case
your router does not have the built-in DHCP server
function, it is necessary to set up the network manually.
For details, see
Setting the IP address
on page 46 .
Note
• Refer to the operation manual of the equipment you
have as the connected equipment and connection
method may differ depending on your Internet
environment.
• When using a broadband Internet connection, a
contract with an Internet service provider is required.
For more details, contact your nearest Internet
service provider.
• Please note that Pioneer will accept no responsibility
whatsoever for communications errors or problems
related to the user's network connection environment
or connected devices. Contact your provider or the
manufacturer of your connected devices.
Connecting with a LAN cable
(wired LAN)
Connect the LAN terminal on this receiver to the LAN
terminal on your router (with or without the built-in DHCP
server function) with a straight LAN cable (CAT 5 or
higher).
LAN terminal specifications
LAN terminal: Ethernet jack (10BASE-T/100BASE-TX)
Connecting the power
cord
Connect the power cord after all the connections between
devices have been completed.
RS-232C
DIGITAL AUDIO OUT
LAN
(10/100)
USB
DMI OUT
OPTICAL
MAIN
COAXIAL
ZERO SIGNAL
WAN
3
2
1
LAN
LAN cable
(commercially available)
Router
Internet
Modem
LAN cable
(commercially
available)
Computer
BDP-LX88’s rear panel
AC IN
BDP-LX88’s rear panel
Power cord
(included)
To wall outlet
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 22 ページ ２０１４年９月９日 火曜日 午前１０時１４分
