06
39
Problem
Check
Remedy
Picture freezes and the
front panel and remote
control buttons stop
working.
• Press
to stop playback, then restart
playback.
• If the playback cannot be stopped,
press
STANDBY/ON on the player’s
front panel to turn off the power, then turn
the power back on.
• If the power cannot be turned off (set to
standby), use a thin rod to press the reset
button on the main unit’s front panel. The
unit restarts, at which point it is again
operable.
No picture is displayed
or picture is not output
in high definition when
playing BDs.
With some discs, it may not be possible
to output the video signals from the
VIDEO output terminal. In this case,
connect using an HDMI cable.
• Picture is disturbed
during playback.
• Picture is dark.
• This player supports Macrovision
analog copy protection technology. With
some TVs (such as with built-in video
deck), the picture will not be displayed
properly when the copy protected DVD
title is played. This is not a malfunction.
• If the player and TV are connected via a
DVD recorder/video deck, etc., the
picture will not be displayed properly due
to analog copy protection. Connect the
player and TV directly.
• Picture is stretched.
• Picture is cropped.
• Aspect ratio cannot
be switched.
Is the TV’s aspect ratio properly set?
Read the TV’s operating instructions and
set the TV’s aspect ratio properly.
Is TV Aspect Ratio properly set?
Set TV Aspect Ratio properly.
When video signals with a resolution of
1080i, 1080p or 720p are being output
from the HDMI OUT terminal, they may
be output with an aspect ratio of 16:9
even if TV Aspect Ratio is set to 4:3.
Picture is interrupted.
The picture may be interrupted when the
resolution of the recorded video signal
switches. Press HDMI to select a setting
other than Auto or Source Direct
The subtitles cannot
be switched.
The subtitles cannot be switched for
discs recorded on a DVD or BD recorder.
Sound and picture are
not synchronized.
Is Output Terminal properly set?
Set Output Terminal properly.
•
No sound is output.
•
Sound is not output
properly.
Is the disc played back in slow motion?
Is the disc played back in fast
forward or fast reverse?
No sound is output during slow motion
play and forward and reverse scanning.
Are the audio cables properly
connected?
•
Connect the cable properly according
to the connected devices(page 15)
•
Insert the cable firmly and all the way in.
Is the audio cable damaged?
If the cable is damaged, replace it with a
new one.
Are the connected components (AV
receiver or amplifier, etc.) properly
set?
Read the operating instructions of the
connected components and check the
volume, input, speaker settings, etc.
Summary of Contents for BDP-3110
