4 Touch any of 1
8 to select the desired
level.
The parental lock level is set.
!
LEVEL 8
Playback of the entire disc is pos-
sible (initial setting)
!
LEVEL 7
LEVEL 2
Playback of discs for
children and non-adult-oriented discs is
possible
!
LEVEL 1
Playback of discs for children
only is possible
Notes
!
We recommend to keep a record of your code
number in case you forget it.
!
The parental lock level is recorded on the disc.
You can confirm it by looking at the disc pack-
age, included literature or on the disc itself.
With discs that do not feature a recorded par-
ental lock level, you cannot use parental lock.
!
With some discs, parental lock operates to
skip certain scenes only, after which normal
playback resumes. For details, refer to the
disc
s instructions.
Changing the level
You can change the set parental lock level.
1 Touch SETUP and VISUAL and then
touch PARENTAL.
2 Touch 0
9 to input the registered code
number.
3 Touch ENTER.
This enters the code number, and you can now
change the level.
#
If you input an incorrect code number, the
icon
is displayed. Touch
C
and input the cor-
rect code number.
#
If you forget your code number, refer to
If you
forget your code number
on this page.
4 Touch any of 1
8 to select the desired
level.
The new parental lock level is set.
If you forget your code number
Refer to
Changing the level
on this page, and
touch
C
10 times. The registered code number
is canceled, letting you register a new one.
Setting for digitaloutput
Set digital output correctly to match the com-
ponents you are using with this unit. There is
no need to change settings if this unit is not
connected for digital output.
!
When using this unit with a Pioneer multi-
channel processor (DEQ-P8000), select
DOLBY/LPCM
.
!
When using this unit with a head unit fea-
tures digital input (e.g., DEX-P9), select
LPCM
.
Important
Incorrect setting may result in noise and damage
to speakers so be sure to read the manuals of the
connected components.
1 Touch SETUP and AUDIO and then
touch DIGTL OUT.
2 Touch either of the following touch
panel keys to select the digital output set-
ting.
!
DOLBY/LPCM
The Dolby Digital signal is
output as it is (initial setting)
!
LPCM
The Dolby Digital signal is con-
verted to and output as a linear PCM signal
Setting up the DVD player
En
60
Section
11
