Pioneer AVX-MG2037UC, Service Manual

Page: 122 / 140

AVX-MG2037ZF/XN/UC
A
B
C
D
1 2 3 4
1 2 3 4
122
Fig.7
-
Removing the Mechanism Unit(Fig.6)
1. Remove the two springs A and two springs B from the hook.
2. Remove the nine screws A and then remove the holder.
3. Remove the four screws B and then remove the two brackets from chassis.
4. Remove the four dampers and then remove the Mechanism Unit
-
Removing the Control Unit(Fig.6)
1. Apply shorting solder to the PU flexible cable.
2. Disconnect the connector.
3. Remove the two screws C.
4. Remove the Control Unit(G2F).
Fig.6
Mechanism Unit
Holder
A
A
A
A
B
B
B
-
Removing the Connector PCB(Fig.7)
1. Remove the two screws A and then remove the Connector PCB.
-
Removing the Drive Mechanism Unit(Fig.7)
1. Disconnect the connector.
2. Remove the two screws B and then remove the Drive Mechanism Unit.
-
Removing the Tuner Audio Unit(Fig.7)
1. Remove the two screws C, two screws D and screw E.
2. Unbend the tab indicated by arrow and then remove the Tuner Audio Unit.
Connector PCB
Drive Mechanism
Unit
Tuner Audio Unit
Connector
A
A
B
B
C
C
E
D
D
A
A
B
A
C
C
Damper
A
Damper
Damper
Damper
Spring A
Spring A
Spring B
Spring B
Bracket
Bracket
Control Unit
(G2F)
A
Chassis
Chassis Unit
Shorting Solder