Turning the unit on and
selecting a source
1
1
Source icon
Shows which source has been selected.
%
Press AV SOURCE to select a video
source.
Press
AV SOURCE
repeatedly to switch be-
tween the following sources:
AV-1
(video input 1)
AV-2
(video input 2)
AV
(video of currently selected source)
NAVI
(navigation unit)
Notes
!
Equipment which is connected to AV-BUS
input can be selected as
AV
source. You can
watch video from connected equipment
which is selected as a source by a head unit.
!
In the following cases, the sound source will
not change:
When there is no unit corresponding to the
selected source connected to this unit.
When
AV INPUT1
(video input 1) and/or
AV INPUT2
(video input 2) are not set to
VIDEO
(refer to page 12).
Turning the unit off
%
Press AV SOURCE and hold until the
unit turns off.
Displaying the navigation
image
You can display navigation map and naviga-
tion menu on this display.
!
You can operate these functions only when
a Pioneer navigation unit is connected to
this unit.
Displaying navigation map
%
Press WIDE to display navigation map.
#
When the map is scrolled, pressing this but-
ton returns to the display of the map of your sur-
roundings.
Displaying navigation menu
%
Press ENTERTAINMENT to display navi-
gation menu when the navigation map is
displayed.
Switching to the navigation image
%
Press V.ADJ to switch the display to na-
vigation image.
#
To return to the video of each source, press
V.ADJ
again.
Opening and closing the
LCD panel
The LCD panel will be opened or closed auto-
matically with the turning of the ignition
switch on or off. You can turn off the automatic
close/open function. (Refer to page 13.)
!
Do not close the LCD panel with hands by
force. That cause malfunction.
!
The automatic close/open function will op-
erate the display as follows.
When the ignition switch is turned OFF
while the LCD panel is opened, the LCD
panel will close after six seconds.
Basic Operations
En
7
English
Section
04
