Introduction of setup
adjustments
3
2
1
1
Function display
Shows the function names.
2
ESC key
Touch to cancel the control mode of func-
tions.
3
BACK key
Touch to return to the previous display.
1 Touch the screen to activate the touch
panel keys.
The touch panel keys appear on the display.
2 Touch A.MENU to display the function
names.
The function names are displayed and oper-
able ones are highlighted.
#
To return to the previous display, touch
BACK
.
#
To return to the display of each source, touch
ESC
.
Note
If you do not operate the setup function within
about 30 seconds, the display is automatically re-
turned to the source display.
Setting the video input 1
You can switch the setting according to the
connected component.
!
Select
VIDEO
to watch video of a con-
nected component as
AV-1
source.
1 Touch A.MENU and then touch
AV INPUT1.
2 Touch
c
or
d
to select the video input 1
setting.
Touch
c
or
d
until the desired setting appears
in the display.
!
OFF
No video component is connected
!
VIDEO
External video component
Setting the video input 2
You can switch the setting according to the
connected component.
!
Select
VIDEO
to watch video of a con-
nected component as
AV-2
source.
!
Select
B. CAMERA
when a rear view cam-
era is installed on your vehicle.
1 Touch A.MENU and then touch
AV INPUT2.
2 Touch
c
or
d
to select the video input 2
setting.
Touch
c
or
d
until the desired setting appears
in the display.
!
OFF
No video component is connected
!
VIDEO
External video component
!
B. CAMERA
Rear view camera
Other Functions
En
12
Section
05
