Pioneer AVIC-HD3 Service Manual Download Page 310

Page: 310 / 317

CX-3016

Removing the pickup unit (fig. 4))

1. Remove the module pc board in accordance with the procedure of "Removing the module pc board.”

2. While holding the pickup case, remove the skew screw (main).

3. Lifting the end of the pickup rack, slide the main shaft, and remove the pickup unit.

Notes:

Replacing the pickup unit requires the skew adjustment.

Remove glue from both ends of the main and sub shafts, and skew stud.

Do not reuse the old skew screw. Be sure to use a brand-new skew screw supplied with a new pickup unit.

Fix the skew screw with glue (GYL1001) after adjustment.

Sub shaft

Pickup unit

Skew screw

Fig. 4

Skew screw (main)

Skew screw

Summary of Contents for AVIC-HD3






























































































































































































































































































































Search results

Summary of Contents for AVIC-HD3

Reviews:

Related manuals for AVIC-HD3

Brands by name

Popular brands

Pioneer AVIC-HD3, Service Manual

Search results

Summary of Contents for AVIC-HD3

Reviews:

Related manuals for AVIC-HD3

Brands by name

Popular brands