Pioneer AVIC-F930BT, Operation Manual

Page: 15 / 208

Removing the front panel
p
The navigation system cannot be operated
while the front panel is removed from the
navigation system.
1 Press and hold the Detach button, and
slide it down.
When you release your finger, the bottom of
the front panel separates slightly from the na-
vigation system.
2 Gently grip the bottom of the front
panel and slowly pull it outward.
Front panel
Attaching the front panel
1 Slide the front panel all the way into
the navigation system.
Make sure the front panel is securely con-
nected to the mounting hooks of the naviga-
tion system.
2 Push the lower part of the front panel
until you hear a click.
If you fail to successfully attach the front panel
to the navigation system, try again but be care-
ful not to force it as the panel could be
damaged.
Adjusting the LCD panel angle
p
This function is available for AVIC-F30BT
only.
WARNING
When opening, closing and adjusting the angle
of the LCD panel, be careful not to get your fin-
gers caught.
CAUTION
Do not open or close the LCD panel by force. This
may cause malfunction.
1 Press the
h
button.
The “
Monitor Setup
” screen appears.
2 Touch or to adjust the angle.
3 Touch .
p The adjusted angle of the LCD panel will be
memorised and the LCD panel will automa-
tically return to that angle the next time the
LCD panel is opened or closed.
Inserting and ejecting a disc
Inserting a disc (for AVIC-F30BT)
WARNING
! When opening, closing and adjusting the
angle of the LCD panel, be careful not to get
your fingers caught.
! Do not use with the LCD panel left open. If
LCD panel is left open, it may result in injury
in the event of an accident.
Engb
15
Chapter
02
Basic
operation
Basic operation