=
For more details of the operation, refer to
Replacing the location as the new final desti-
nation
on this page.
Starting Point
Sets the location as a starting point.
=
For more details of the operation, refer to
Setting the location as the start point
on the
next page.
Save as...
Add Pin
Puts a map pin at the cursor position as a
mark up.
=
For details, refer to
Placing a map pin on the
location
on the next page.
Add POI
Stores the cursor position as a POI.
=
For details, refer to
Registering the location
as a customised POI
on page 38.
Add Favourite
Stores the cursor position as one of the
“
Fa-
vourites
”
.
=
For details, refer to
Storing the location in
“
Favourites
”
on page 39.
Add Cam
Stores the cursor position as a safety camera
location.
=
For details, refer to
Storing the position as a
safety camera location
on page 39.
Setting the location as a
new destination
1
Touch [Route...] on the
“
Map Confirmation Screen
”
.
2
Touch [Go Here Now].
When the route is not set, route calculation
starts immediately.
When a route has already been set, a message
will appear asking you to cancel it. Touch [
Yes
]
to start the route calculation.
p
When the cursor overlaps with a destina-
tion that has already been set, touch [
Re-
move Dest.
] to cancel the current route or
recalculate the route by setting one of the
remaining waypoints as the destination.
Setting the location as a
waypoint
1
Touch [Route...] on the
“
Map Confirmation Screen
”
.
2
Touch [Add Via].
p
When the cursor overlaps a waypoint al-
ready set, touch [
Remove Via
] to delete the
waypoint and recalculate the route.
Replacing the location as
the new final destination
1
Touch [Route...] on the
“
Map Confirmation Screen
”
.
2
Touch [Continue].
p
Recalculates the route by setting the cursor
position as the new destination. The pre-
vious destination becomes a waypoint.
After the location is decided (Map Confirmation Screen)
Engb
36
Chapter
04
