Black plate (24,1)
Installing the GPS aerial
CAUTION
Do not cut the GPS aerial lead to shorten it
or use an extension to make it longer. Alter-
ing the aerial cable could result in a short cir-
cuit or malfunction and permanent damage
to this product.
Installation notes
!
The aerial should be installed on a level sur-
face where radio waves will be blocked as
little as possible. Radio waves cannot be re-
ceived by the aerial if reception from the sa-
tellite is blocked.
1
2
1
Dashboard
2
Rear shelf
!
When installing the GPS aerial inside the
vehicle, be sure to use the metal sheet pro-
vided with your system. If this is not used,
the reception sensitivity will be poor.
!
Do not cut the accessory metal sheet. This
would reduce the sensitivity of the GPS aer-
ial.
!
Take care not to pull the aerial lead when
removing the GPS aerial. The magnet at-
tached to the aerial is very powerful, and
the lead may become detached.
!
Do not paint the GPS aerial, as this may af-
fect its performance.
Parts supplied
GPS aerial
Metal sheet
<CRB4539-A>24
Engb
24
Section
03
Installation
