Black plate (23,1)
Parts supplied
This product
Truss head screw
(5 mm × 8 mm)
(6 pcs.)
Frame
Installation using the screw
holes on the side of this product
%
Fastening this product to the factory
radio-mounting bracket.
Position this product so that its screw holes
are aligned with the screw holes of the brack-
et, and tighten the screws at three locations
on each side.
If the pawl interferes with installation,
you may bend it down out of the way.
1
2
3
4
1
Factory radio-mounting bracket
2
Dashboard or console
3
Frame
In some types of vehicles, discrepancy may
occur between the unit and the dashboard.
If this happens, use the supplied frame to
fill the gap.
4
Truss head screw
Be sure to use the screws supplied with
this product.
<CRB4539-A>23
Engb
23
Section
03
Installation
Installation
