4
Press the centre of MULTI-CONTROL to
begin a search.
The tuner searches for a station broadcasting
that programme type.
p
To stop the search, press the centre of
MULTI-CONTROL
.
p
The programmes of some stations may dif-
fer from that indicated by the transmitted
PTY.
p
If no station is broadcasting the type of pro-
gramme you searched for,
“
Not Found
”
is
displayed for about two seconds and then
the tuner returns to the original station.
Receiving traffic
announcements
TA (traffic announcement standby) lets you re-
ceive traffic announcements automatically, no
matter what source you are listening to. TA
can be activated for both a TP station (a sta-
tion that broadcasts traffic information) or an-
other enhanced network
’
s TP station (a station
carrying information that cross-references TP
stations).
1
Tune in a TP station or another en-
hanced network
’
s TP station.
When you are tuned into a TP station or an-
other enhanced network
’
s TP station,
indicator will light.
2
Display the
“
Function Menu
”
screen.
=
For details of the operation, refer to
3
Turn MULTI-CONTROL to display
“
Traffic Announce
”
.
4
Press the centre of MULTI-CONTROL to
switch the setting to
“
On
”
.
Each press of the centre of
MULTI-CONTROL
switches the setting between on and off.
p
You can also cancel the announcement by
changing the audio source or pressing
MULTI-CONTROL
left or right.
5
Use MULTI-CONTROL to adjust the TA
volume when a traffic announcement be-
gins.
The newly set volume is stored in memory and
recalled for subsequent traffic announce-
ments.
6
Press the BAND/ESC button while a
traffic announcement is being received to
cancel the announcement.
The tuner returns to the original source but re-
mains in standby mode until turning the traffic
announcement standby off.
p
Pressing the
SRC/OFF
button enables you
to perform the equivalent operation.
p
The system switches back to the original
source following traffic announcement re-
ception.
p
Only TP stations and other enhanced net-
works
’
TP stations are tuned in during seek
tuning or BSM when the TA function is
on.
Tuning into alternative
frequencies
If you are listening to a broadcast and the re-
ception becomes weak or there are other pro-
blems, the navigation system will
automatically search for a different station in
the same network that is broadcasting a stron-
ger signal.
1
Display the
“
Function Menu
”
screen.
=
For details of the operation, refer to
2
Turn MULTI-CONTROL to display
“
Alternative FREQ
”
.
3
Press the centre of MULTI-CONTROL to
switch the setting to
“
On
”
.
Each press of the centre of
MULTI-CONTROL
switches the setting between on and off.
Engb
83
Chapter
16
Using
the
radio
(
TUNER
)
Using the radio (
TUNER
)
