Pioneer AVIC-F320BT, Operation Manual

Page: 82 / 148

3 Press the centre of MULTI-CONTROL to
begin a search.
“
Searching
”
begins to flash. While
“
Search-
ing
”
is flashing, the six strongest broadcast
frequencies will be stored under the preset
tuning keys
to in order of their signal
strength. When this is complete,
“
Searching
”
stops flashing.
p
To cancel the storage process, press the
centre of
MULTI-CONTROL again.
p
Storing broadcast frequencies with BSM
may replace broadcast frequencies you
have already saved by using
to .
Limiting stations to
regional programming
When AF is used to automatically retune fre-
quencies, the regional function limits the se-
lection to stations broadcasting regional
programmes.
1 Display the
“
Function Menu
”
screen.
=
For details of the operation, refer to Display-
ing the
“
Function Menu
”
screen on page
79.
2 Turn MULTI-CONTROL to display
“
Regional
”
.
3 Press the centre of MULTI-CONTROL to
switch the setting to
“
On
”
.
Each press of the centre of
MULTI-CONTROL
switches the setting between on and off.
p
Regional programming and regional net-
works are organised differently depending
on the country (i.e., they may change ac-
cording to the time, country or broadcast
area).
p
The preset number may disappear on the
display if the tuner tunes in a regional sta-
tion that differs from the originally set sta-
tion.
p
The regional function can be turned on or
off independently for each FM band.
Tuning in strong signals
Local seek tuning allows you to tune in only
those radio stations with sufficiently strong
signals for good reception.
1 Display the
“
Function Menu
”
screen.
=
For details of the operation, refer to Display-
ing the
“
Function Menu
”
screen on page
79.
2 Turn MULTI-CONTROL to display
“
Local
”
.
3 Press the centre of MULTI-CONTROL.
Each press of the centre of
MULTI-CONTROL
switches the setting between on and off.
4 Press MULTI-CONTROL left or right to
set the sensitivity.
!
FM: Level 1
—
Level 2
—
Level 3
—
Level 4
!
MW/LW: Level 1
—
Level 2
p
The highest level setting allows reception of
only the strongest stations, while lower set-
tings let you receive weaker stations.
Searching for an RDS
station by PTY information
You can search for general types of broadcast-
ing programmes.
=
For details, refer to PTY list on page 85.
1 Display the
“
Function Menu
”
screen.
=
For details of the operation, refer to Display-
ing the
“
Function Menu
”
screen on page
79.
2 Turn MULTI-CONTROL to display
“
PTY Search
”
.
3 Press MULTI-CONTROL left or right to
select a programme type.
There are four programme types:
News&Information
—
Popular
—
Classics
—
Others
Engb
82
Chapter
16
Using the radio ( TUNER )