Pioneer AVIC-8DVD Service Manual Download Page 129

Page: 129 / 174

129

AVIC-8DVD

DVD Test Modes

CAUTIONS

Protection is not operational against a mechanical runaway conditions during servo testing,.

Critical damage can result if the system is allowed to continue in a mechanical runaway state.

If abnormal noise is heard during the test, turn the power OFF immediately.

Entering the test mode

The test mode can be selected from the navigation test mode (please refer to pages 120 and 124).

Keys (remote control) used for the DVD test mode

[OK] : Selection decided.

[BACK] : Go back.

Directional keys : [ ] keys of the joystick.

(1) Initial screen display

FirmWare Revision: Version of the drive used.

[1]

Starts the FE test mode.

[2]

EDC1 mode (available for DVDs only).

[3]

EDC2 mode (available for DVDs only).

[4]

Executes the MS2 memory clearing operation.

[OK]

Executes.

[BACK] Returns to the test mode menu.

* Using the joystick select individual items .

[MS2 X-954 Test]

FirmWare Revision.

Core Ver **.** Apl Ver **.**

---------------------------------------------------------

[1]

FE TestMode

[2] EDC-1 mode
[3] EDC-2 mode
[4] MS2 Memory Clear Start

Press

[OK]

to make a selection

Press

[BACK]

to return

Summary of Contents for AVIC-8DVD















































































































































































Search results

Summary of Contents for AVIC-8DVD

Reviews:

Related manuals for AVIC-8DVD

Brands by name

Popular brands

Pioneer AVIC-8DVD, Service Manual

Search results

Summary of Contents for AVIC-8DVD

Reviews:

Related manuals for AVIC-8DVD

Brands by name

Popular brands