Pioneer AVIC-8DVD, Service Manual

Page: 136 / 174

136
AVIC-8DVD
1. Start up
Insert the test disc into the system, and press the [BACK] key while the title, "AVIC-9DVD/EW, AVIC-9DVD/UC and
AVIC-8DVD/EW TEST DISC" is displayed. This will bring up the menu screen.
If keys are not pressed while the title is displayed, the initial screen of the line testing will be displayed.
2. Key Operations
• Line testing screen display
1. To switch between the testing screen and menu screen displays press the [CR] key.
2. To test a selected item press the [BACK] key.
3. To revert to the previous screen press the [ ] key.
4. To move to the next test screen press the [ ] key (the display will not change to the next screen, unless the
test has been completed successfully).
* For details please refer to descriptions for each screen.
• Menu screen for service
1. Select an item by using the [ ] and [ ] keys, then press the [CR] key to display the test screen.
2. To return to the menu screen press the [BACK] key.
* For details please refer to descriptions on each screen.
3. Test Screen Display
1. External Connections
• Status of items listed on the left will be updated every second.
• The VCUE (Pin-9) line will be turned ON during the test.
• The status of the Illumination, Parking Brake and Reverse Gear
must change between ON and OFF.
• Pressing the [ ] key will not enable the test to proceed to the
next test unless all conditions have been satisfied.
7.1.2 USING THE TEST DISC
Connection check
Illumination signal
Parking brake signal
Reverse gear signal
Car speed signal
Gyro
Gyro voltage
Gyro delta sigma
Battery voltage
G sensor
G sensor voltage
Remote controller
Helpnet switch/ sense
[Push joy stick down to go to next check]
OFF
ON
REV
0
LEFT << 49845
2.434 V OK
10.6 OK
12.3 V OK
++ 40635
1.985 V OK
MENU KEY
ON/ ON
-
TEST DISC Part No. : GGV1059 (CNDK-LP0102)