Pioneer AVIC-800DVD Operation Manual Download Page 105

Page: 105 / 190

104

(18)

(DETOUR) button

This button is used to stop the playback of the disc when playing DVD.

(19)

(CANCEL ROUTE) button (XDV-P9, XDV-P9

—

only)

During DVD-video playback, press this for frame-by-frame reverse.

(20)

(GUIDE) button

During DVD-video playback, press this to move frame-by-frame.

(21) Numeric keypad

Use this keypad for entering numbers such as chapter numbers.

(22) CLEAR button

This is used when canceling numbers entered such as chapter numbers.

(23) AUDIO [•] button

This button is used for switching voice (language used for voice, recording type) when oper-
ating DVD player.

(24) SUB.T (DELETE) button

This button is used for switching a subtitle when operating DVD player.

(25) ANGLE (OK) button

This button is used for switching angles when operating DVD player.

➲

With some discs, the prohibited mark “

” may be displayed and operation may not be

possible.

Operation of the DVD player

When using the Remote Control of AVIC-8DVD, only the operations controlled from
the AV Head Unit are possible for Pioneer’s DVD player.
When using other Remote Control of Pioneer Navigation Unit, set the operation
mode switch to “DVD”.

CRB1875A_Eng.book Page 104 Thursday, March 27, 2003 1:22 PM

Summary of Contents for AVIC-800DVD































































































































































































Search results

Summary of Contents for AVIC-800DVD

Reviews:

Related manuals for AVIC-800DVD

Brands by name

Popular brands

Pioneer AVIC-800DVD, Operation Manual

Search results

Summary of Contents for AVIC-800DVD

Reviews:

Related manuals for AVIC-800DVD

Brands by name

Popular brands