Pioneer AVIC-800DVD, Operation Manual

Page: 126 / 190

125
Chapter
6
Combining and Using Pioneer A
V
Equipment
➲
Titles of up to 10 characters can be displayed.
➲
Display of some characters may not be possible.
■
Pausing CD playback
Pause lets you temporarily stop playback of the CD.
1 Press
5
or
∞
to select “PAUSE” from the MULTI-CD MENU, and press A.MENU
(AUDIO) button.
2 Press
5
to turn pause on.
Play of the current track pauses.
3 Press
∞
to turn pause off.
Play will resume at the same point that you turned pause on.
■
Using compression and bass emphasis
You can use these functions only with a multi-CD player that supports them.
Using COMP (compression) and DBE (dynamic bass emphasis) functions let you adjust the
sound playback quality of the multi-CD player. Each of the functions have a two-step adjust-
ment. The COMP function balances the output of louder and softer sounds at higher volumes.
DBE boosts bass levels to give playback a fuller sound. Listen to each of the effects as you
select through them and use the one that best enhances the playback of the track or CD that
you are listening to.
1 Press
5
or
∞
to select “COMP (COMPRESSION)” from the MULTI-CD MENU, and
press A.MENU (AUDIO) button.
➲
If the multi-CD player does not support COMP/DBE, “NO COMP” is displayed when
you attempt to select it.
2 Press
2
or
3
to select your favorite setting.
Press
2
or
3
repeatedly to switch between the following settings:
COMP OFF - COMP 1 - COMP 2 - COMP OFF - DBE 1 - DBE 2
■
Using ITS playlists
ITS (instant track selection) lets you make a playlist of favorite tracks from those in the multi-
CD player magazine. After you have added your favorite tracks to the playlist you can turn on
ITS play and play just those selections.
Creating a playlist with ITS programming
You can use ITS to enter and playback up to 99 tracks per disc, up to 100 discs (with the disc
title). (With multi-CD players sold before the CDX-P1250 and CDX-P650, up to 24 tracks
can be stored in the playlist.)
When using a multi-CD player that does not feature an ITS function, you cannot select “ITS
PLAY”.
1 Play a CD that you want to program.
2 Press
5
or
∞
to select “ITS (INSTANT TRACK SELECTION) MEMORY” from the
MULTI-CD MENU, and press A.MENU (AUDIO) button.
3 Select a desired track by pressing
2 2 2 2
or
3
.
CRB1875A_Eng.book Page 125 Thursday, March 27, 2003 1:22 PM