< CRB4496-A >
27
Chapter
61
Engb
Connecting the power cord
Aerial jack
Power supply
Power cord
Yellow/black
If you use an equipment with Mute function, wire this lead to the Audio Mute lead on
that equipment. If not, keep the Audio Mute lead free of any connections.
Light green
Used to detect the ON/OFF status of the handbrake. This lead must be connected to
the power supply side of the handbrake switch.
Blue/white
Connect to system control terminal of the
power amp (max. 300 mA 12 V DC).
Earth side
Power supply side
Handbrake
switch
This product
Violet/white
Of the two lead wires connected to the back lamp, connect the one in which the
voltage changes when the gear stick is in the REVERSE (R) position. This connection
enables the unit to sense whether the car is moving forwards or backwards.
4 m
Fuse (10 A)
Microphone
Yellow
To terminal supplied with power regardless of ignition
switch position.
Orange/white
To lighting switch terminal.
Black (earth)
To vehicle (metal) body.
Left
Right
Front speaker
Front speaker
Rear speaker
White
Grey
Grey/black
White/black
Green
Violet
Green/black
Violet/black
Rear speaker
Red
To electric terminal controlled by ignition switch (12 V DC)
ON/OFF.
With a two-speaker system, do not connect
anything to the speaker leads that are not
connected to speakers.
Wired remote input
Hard-wired remote control adapter can be connected (sold separately).
Note
Make sure to connect the microphone supplied with this product when using
Android Auto
.
CRB4496-AN.indd 61
2015/01/13 17:35:25
