Pioneer AVH-X7700BT/XNEW5, Service Manual

Page: 69 / 180

AVH-X7700BT/XNUC
69
5 6 7 8
5 6
7
8
C
D
F
A
B
E
Fig.8
Disconnect the three connectors.
Remove the two Gaskets.
Attention at assembly:
Attach the Gaskets as shown in the photo
when mounting the Monitor Unit.
Attention at assembly:
Styling cable as like photo.
1
2
3
Monitor Unit
Grille
2 2
1
3 3
1
1
Fig.7
Release the two latches and then remove
the Monitor Unit.
3
5
7
2
3 3
3
4
4
2
2
2
3
1
1
4
6
8
2 2
1
2
4
3
5
6
7
8
Remove the two screws.
Remove the six screws and then remove
the Cover.
Remove the five Gears.
(When installing the Gears, please use
caution not to mistake the installation
position)
Remove the five solders.
Remove the screw and then remove the
Main PCB Unit.
Remove the Washer, Arm(1) and the Torsion
Spring.
Remove the Washer, Arm(2) and the Torsion
Spring.
Remove the screw and then remove the
SW PCB Unit.
Removing the Main PCB Unit and the SW PCB Unit (Fig.8)
Cover
Main PCB Unit
SW PCB Unit
Removing the Monitor Unit (Fig.7)
Arm(2)
Arm(1)
Note:
As Main PCB Unit and SW PCB Unit are
connected with FFC, Main PCB Unit and
SW PCB Unit are removed at the same time.
Attention at assembly:
Be careful of not pinching FPC from
Monitor Unit when you mount the
Grille.