Pioneer AVH-X1800S, Owner'S Manual

Page: 41 / 216

41
Displaying the “System” set-
ting screen
1 Press .
2 Touch , and then
.
The “ System ” setting screen appears.
Setting Bluetooth audio source
activation
X5800BHS X4800BS X3800BHS X2800BS
The default setting is “ On ”.
1 Display the “ System ” setting screen.
 Refer to Displaying the “ System ” setting screen on page
41
2 Touch [ AV Source Settings ].
3 Touch [
Bluetooth Audio
] to switch “
On
” or
“
Off
”.
Setting Spotify source
activation
The default setting is “ On ”.
1 Display the “ System ” setting screen.
 Refer to Displaying the “ System ” setting screen on page
41
2 Touch [
AV Source Settings
].
3 Touch [
Spotify
] to switch “
On
” or “
Off
”.
Setting the ever scroll
When “ Ever Scroll ” is set to “ On ”, the recorded text information
scrolls continuously in the display while the vehicle is stopped.
The default setting is “ Off ”.
1 Display the “
System
” setting screen.
 Refer to Displaying the “
System
” setting screen on page
41
2 Touch [ Ever Scroll ] to switch “ On ” or “ Off ”.
Setting the beep tone
The default setting is “ On ”.
1 Display the “ System ” setting screen.

Refer to Displaying the “ System ” setting screen on page
41
2 Touch [ Beep Tone ] to switch “ On ” or “ Off ”.
Setting the auto audio mix
function
You can select whether or not to use the auto audio mix function.
The default setting is “
On
”.
1 Display the “ System ” setting screen.
 Refer to Displaying the “ System ” setting screen on page
41
2 Touch [
Auto Mix
] to switch “
On
” or “
Off
”.
Setting the rear view camera
A separately sold rear view camera (e.g. ND-BC8) is required
for utilizing the rear view camera function. (For details, consult
your dealer.)
Rear view camera
This product features a function that automatically switches to
the full-screen image of the rear view camera installed on your
vehicle, when the shift lever is in the REVERSE (R) position.
Camera View mode also allows you to check what is behind you
while driving.
Camera for Camera View mode
Camera View can be displayed at all times. Please note that
with this setting, the camera image is not resized to fit, and that
a portion of what is seen by the camera is not viewable.
To display the camera image, touch [
Camera View
] on the “
AV
source selection ” screen.
 Refer to Source on the AV source selection screen on page
11
p
To set the rear view camera as the camera for
Camera View
mode, set “ Back Camera Input ” to “ On ”.
 Refer to Setting rear view camera activation on page 41
p
When using the 2nd camera, set “ AV Input ” to “ Camera ”.
(AVH-X5800BHS)(AVH-X3800BHS)
 Refer to Starting procedure (for camera) on page 39
p
When the camera view of both the rear view camera and 2nd
camera are available, the key to switch the display appears.
Touch this key to switch the display between the rear view
image and 2nd camera image.
CAUTION
Pioneer recommends the use of a camera which outputs
mirror reversed images, otherwise the screen image may
appear reversed.
p
Immediately verify whether the display changes to a
rear view camera image when the shift lever is moved to
REVERSE (R) from another position.
p
When the screen changes to full-screen rear view camera
image during normal driving, switch to the opposite setting
in “ Camera Polarity ”.
p
If you touch while the camera image is displayed, the
displayed image will turn off temporarily.
Setting rear view camera activation
The default setting is “ Off ”.
1 Display the “
System
” setting screen.
 Refer to Displaying the “
System
” setting screen on page
41
2 Touch [ Camera settings ].
3 Touch [ Back Camera Input ] to switch “ On ” or
“ Off ”.
Setting the polarity of the rear view
camera
p
This function is available when “
Back Camera Input
” is
“ On ”.
 Refer to Setting rear view camera activation on page 41
1 Display the “
System
” setting screen.
 Refer to Displaying the “ System ” setting screen on page
41
2 Touch [ Camera settings ].
3 Touch [ Camera Polarity ].

Battery (default):
The polarity of the connected lead is positive.

Ground :
The polarity of the connected lead is negative.
Setting the demo mode
The default setting is “ On ”.
System settings
Setting the MIXTRAX effect
You can set and play back the MIXTRAX effect that you want.
The default setting is “ Standard ”.
1 Display the “ MIXTRAX Settings ” screen.

Refer to Displaying the “MIXTRAX Settings” screen on page
40
2 Touch [ Effect Setting ].
3 Touch the item.
The following items are available:
Standard , Simple , Custom
p
When you select “ Custom ”, check the effect that you want.
Setting the flash pattern
The flashing color changes with the changes in the sound and
bass levels.
1 Display the “ MIXTRAX Settings ” screen.
 Refer to Displaying the “MIXTRAX Settings” screen on page
40
2 Touch [
Flash Pattern
].
3 Touch the item.

Sound1 (default) to Sound6 :
The flash pattern changes according to the sound level.
Select a desired mode.
 L-Pass1 to L-Pass6 :
The flash pattern changes according to the bass level. Select
a desired mode.

Random1 :
The flash pattern changes randomly according to the sound
level mode and low pass mode.
 Random2 :
The flash pattern changes randomly according to the sound
level mode.

Random3 :
The flash pattern changes randomly according to the low
pass mode.
 Off :
The flash pattern does not flash.
41 < CRD4924-A >
MIXTRAX System settings