Black plate (20,1)
Loading/Ejecting discs
CAUTION
Keep hands and fingers clear of the unit when
opening, closing, or adjusting the LCD panel. Be
especially cautious of children
’
s hands and fin-
gers.
Loading a disc
Up to six discs can be stored into this unit.
Each disc is stored in each disc holder allow-
ing you to specify a holder for loading a disc.
1
Press OPEN on the unit to display load-
ing/ejecting menu.
The LCD panel opens halfway, and the load-
ing/ejecting menu is displayed on the screen.
!
If the disc in the holder has already been
played, the disc type is displayed on the
holder icon (e.g. CD, DVD etc.).
!
NO DISC
is displayed for an empty holder.
2
Touch LOAD next to the holder you
want to insert a disc in.
The selected holder flashes. When
READY
is
displayed, this unit becomes on standby to
load a disc into the holder.
#
If the holder has already loaded a disc, you
need to eject the disc first. For details concerning
about ejecting a disc, refer to
Ejecting a disc
on
the next page.
3
Insert a disc into the disc loading slot.
The disc is loaded into the selected holder.
Repeat these steps until you have done load-
ing discs into this unit.
#
To cancel loading the disc into the selected
holder, touch
CANCEL
.
4
To replace the LCD panel to the original
position, press OPEN on the unit.
#
When the automatic playback function is on,
this unit will cancel the DVD menu and automati-
cally start playback from the first chapter of the
first title. Refer to
Automatic playback of DVDs
on
page 32.
Notes
!
The DVD player plays one, standard 12-cm
disc at a time. Playing back an 8-cm disc is
not possible with this unit. Playable disc and
adapter are listed in the table below.
12-cm disc
8-cm disc
8-cm disc adapter
Ö
—
—
!
Do not insert anything other than a disc into
the disc loading slot. Discs which can be
played back are listed on
Playable discs
on
page 8.
!
If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press
OPEN
and touch
h
to eject the disc,
and check the disc for damage before insert-
ing it again.
!
If an error message such as
ERROR-02
is dis-
played, refer to
Error messages
on page 105.
!
If bookmark function is on, DVD playback re-
sumes from the selected point. For more de-
tails, refer to
Resume playback (Bookmark)
on
page 29.
!
This unit does not automatically change discs
even if it reaches to the end of the currently
playing disc. To change discs, press
a
or
b
button (DISC) on the remote control.
<CRB2163-B>20
Basic Operations
En
20
Section
05
