Black plate (102,1)
5
Touch OK to store the entered title in
memory.
6
Touch ESC to return to the playback dis-
play.
Setting remote control
code type
Changing the remote control operation switch
to
DVD
mode enables you to operate the built-
in DVD player with the supplied remote con-
trol. There are three remote codes for
DVD
mode, code type
A
, code type
B
and code type
AVH
. However, when operating this unit, use
the code type
AVH
only.
!
With this unit, code
A
and
B
cannot be
used.
1
Set the remote control selection switch
on the left side of the remote control to
the appropriate position with a pen tip or
other pointed instrument .
!
If you select
AVH
mode, there is no need to
take the following procedure.
!
If you select
A
/
B
and if in case you need to
operate other Pioneer units (may be avail-
able in the future), take the following proce-
dure and change the code type to the
appropriate type.
2
Press 0 and CLEAR on the remote con-
trol simultaneously to change the code
type.
Initially, the code type is set to
A
. Each time
you press
0
and
CLEAR
simultaneously on the
remote control the code type switches be-
tween
A
and
B
.
Using the preprogrammed
function
You can operate the preprogrammed functions
for each source by using
PGM
.
!
In order to use
PGM
button for prepro-
grammed function, the remote control op-
eration mode switch should be set to
AVH
.
%
Press PGM to turn pause on when se-
lecting the following sources:
!
DVD-V
–
Built-in DVD player
!
M-CD
–
Multi-CD player
!
iPod
–
iPod
!
BT Audio
–
Bluetooth Audio
#
To turn pause off, press
PGM
again.
%
Press PGM and hold to turn BSM on
when selecting TUNER as the source.
Press
PGM
and hold until the BSM turns on.
#
To cancel the storage process, press
PGM
again.
%
Press PGM and hold to turn BSSM on
when selecting TV as the source.
Press
PGM
and hold until the BSSM turns on.
#
To cancel the storage process, press
PGM
again.
<CRB2163-B>102
Other Functions
En
102
Section
21
