!
When the
Camera Polarity
is on, press
and hold
MUTE
to watch the rear view
camera video.
!
To stop watching the rear view camera
video and return to the source display,
press and hold
MUTE
.
!
Touch the
RearView
source icon to display
the rear view camera image while driving.
Touch the source icon again to turn the
rear view camera off. For details, refer to
lecting a source using the touch panel keys
1
Display the system menu.
Refer to
Introduction of menu operations
2
Touch Camera Polarity on the system
menu to select the appropriate setting.
!
Battery
–
When the polarity of the con-
nected lead is positive while the gear shift
is in
REVERSE (R)
position
!
Ground
–
When the polarity of the con-
nected lead is negative while the gear shift
is in
REVERSE (R)
position
!
Off
–
When a rear view camera is not con-
nected to this unit
Selecting the video format
You can switch the video output format of
REAR MONITOR OUTPUT
between NTSC and
PAL.
1
Display the system menu.
Refer to
Introduction of menu operations
2
Touch Video Output Format on the sys-
tem menu to select the video output for-
mat.
NTSC
—
PAL
Note
You can switch the video output format only for
the source from this unit.
Setting the video signal
When you connect this unit to an AV equip-
ment to this unit, select the suitable video sig-
nal setting.
!
As this function is initially set to
Auto
, the
unit will automatically adjust the video sig-
nal setting.
!
You can operate this function only for the
video signal input into the AV input.
1
Display the system menu.
Refer to
Introduction of menu operations
2
Touch Video Signal Setting on the func-
tion menu.
Video Signal Setting
items are displayed.
!
AV
–
Adjusts the AV video signal
!
AUX
–
Adjusts the AUX video signal
!
Camera
–
Adjusts the rear view camera
video signal
3
Touch
c
or
d
to select the desired
video signal appears.
Auto
—
PAL
—
NTSC
—
PAL-M
—
PAL-N
—
SECAM
Auto EQ (auto-equalizing)
The auto-equalizer automatically measures
the car
’
s interior acoustic characteristics, and
then creates an auto-equalizer curve based on
that information.
WARNING
As a loud tone (noise) may be emitted from the
speakers when measuring the car's interior
acoustic characteristics, never perform auto EQ
while driving.
CAUTION
!
Thoroughly check the conditions before per-
forming auto EQ as the speakers may be da-
maged if these functions are performed when:
—
The speakers are incorrectly connected.
(For example, when a rear speaker is con-
nected as a subwoofer output.)
En
38
Section
10
Menu operations
